メインナビゲーションにスキップ 検索にスキップ メインコンテンツにスキップ

Ti-6Al-4V 合金における室温クリープ中の転位の運動様式と変形組織の発達過程

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

2   !!Link opens in a new tab 被引用数 (Scopus)

抄録

The deformation behavior and microstructure evolution of Ti-6Al-4V alloy under room temperature creep was investigated using mechanical test and scanning electron microscope observation with electron back-scatter diffraction method. The alloys were creep deformed and ruptured under initial stresses of 874 MPa, 889 MPa and 904 MPa at room temperature. The rapid stress change test revealed that creep deformation was controlled by the viscous slip motion of dislocations. The stress exponent was estimated as 59. The strain rate of acceleration creep region calculated by the Norton's law with the high stress exponent was inconsistent with that measured by the experimental creep test. Using the slip trace analysis, it was found that single dislocation slip in basal and prism were mainly activated in the early stage of creep, and multiple slips were often observed as the deformation progresses. Especially, the multiple slip including 1st pyramidal slip believed to be effective for suppressing strain rate acceleration in creep. In addition, the work hardening behavior during creep showed a strain rate dependence, indicating that the lower the strain rate is, the more work hardening occurs.

寄稿の翻訳タイトルDislocation motion and microstructure evolution deformed during creep at room temperature in Ti-6Al-4V alloy
本文言語日本語
ページ(範囲)405-414
ページ数10
ジャーナルKeikinzoku/Journal of Japan Institute of Light Metals
巻70
号8
DOI
出版ステータス出版済み - 10月 2020

!!!All Science Journal Classification (ASJC) codes

  • 材料力学
  • 機械工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Ti-6Al-4V 合金における室温クリープ中の転位の運動様式と変形組織の発達過程」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル