Thermal plasma treatment of waste ion-exchange resins doped with metals

Atsushi Nezu, Tatsuhiko Morishima, Takayuki Watanabe

研究成果: ジャーナルへの寄稿会議記事査読

35 被引用数 (Scopus)

抄録

The amount of the waste ion-exchange resins are increasing, therefore, the effective method to reduce the volume of the waste resins, is required. The purpose of this paper is to reduce the weight and volume of the resins by reactive thermal plasmas, and to investigate the reaction mechanism of the resins doped with Co and Cs. In this experiment, cation exchange resins doped with Co and Cs were used as sample resins. The resins were treated by thermal plasmas under atmospheric pressure. The weight was reduced to approximately 51% after 60 min treatment without oxygen injection. At 18 1/min of oxygen flow rate, the weight was reduced to approximately 91%. Small difference in the weight reduction was found among the undoped resins and Co and Cs doped resins. Thermal plasma treatment provides the effective and rapid reduction in weight and the volume of resins. The treatment has good advantages for the stabilization of the doped metals.

本文言語英語
ページ(範囲)335-339
ページ数5
ジャーナルThin Solid Films
435
1-2
DOI
出版ステータス出版済み - 7月 1 2003
外部発表はい
イベントProccedings of the Joint International Plasma Symposium - Jeju Island, 韓国
継続期間: 7月 1 20027月 4 2002

!!!All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 表面および界面
  • 表面、皮膜および薄膜
  • 金属および合金
  • 材料化学

フィンガープリント

「Thermal plasma treatment of waste ion-exchange resins doped with metals」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル