Shear and tensile impact strength of lead-free solder ball grid arrays placed on Ni (P)/Au surface-finished substrates

H. Tsukamoto, T. Nishimura, S. Suenaga, K. Nogita

研究成果: ジャーナルへの寄稿学術誌査読

33 被引用数 (Scopus)

抄録

This study aims to investigate the shear and tensile impact behavior of ball grid arrays (BGAs) placed on Ni (P)/Au surface-finished substrates considering the microstructure and compositions of intermetallic compounds (IMCs) formed at the solder/substrate interfaces. Tests were conducted on as-reflowed and aged samples with four different compositions of solders such as Ni-doped and non-Ni-doped Sn-0.7 wt.%Cu, Sn-37 wt.%Pb and Sn-3.0 wt.%Ag-0.5 wt.%Cu, over a wide range of displacement rates from 10 to 4000 mm/s in shear and from 1 to 400 mm/s in tensile tests. In shear tests, there was almost no difference between as-reflowed and aged samples at low displacement rates in all the samples, while at high displacement rates the aged samples showed better properties than as-reflowed ones, in particular, in Ni-doped Sn-0.7wt%Cu samples. In tensile tests, the aging treatments had little effect on the strength for any compositions of solders at low and high displacement rates. Sn-3.0 wt.%Ag-0.5 wt.%Cu samples with any heat treatments showed the least resistance to both shear and tensile loadings at any displacement rates.

本文言語英語
ページ(範囲)162-171
ページ数10
ジャーナルMaterials Science and Engineering: B
171
1-3
DOI
出版ステータス出版済み - 7月 25 2010
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 材料科学一般
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Shear and tensile impact strength of lead-free solder ball grid arrays placed on Ni (P)/Au surface-finished substrates」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル