Scaling up of High-Pressure Sliding (HPS) for Grain Refinement and Superplasticity

Yoichi Takizawa, Takahiro Masuda, Kazushige Fujimitsu, Takahiro Kajita, Kyohei Watanabe, Manabu Yumoto, Yoshiharu Otagiri, Zenji Horita

    研究成果: ジャーナルへの寄稿学術誌査読

    32 被引用数 (Scopus)

    抄録

    The process of high-pressure sliding (HPS) is a method of severe plastic deformation developed recently for grain refinement of metallic materials under high pressure. The sample for HPS is used with a form of sheet or rod. In this study, an HPS facility with capacities of 500 tonnes for vertical pressing and of 500 and 300 tonnes for horizontal forward and backward pressings, respectively, was newly built and applied for grain refinement of a Mg alloy as AZ61, Al alloys such as Al-Mg-Sc, A2024 and A7075 alloys, a Ti alloy as ASTM-F1295, and a Ni-based superalloy as Inconel 718. Sheet samples with dimensions of 10 to 30 mm width, 100 mm length, and 1 mm thickness were processed at room temperature and ultrafine grains with sizes of ~200 to 300 nm were successfully produced in the alloys. Tensile testing at elevated temperatures confirmed the advent of superplasticity with total elongations of more than 400 pct in all the alloys. It is demonstrated that the HPS can make all the alloys superplastic through processing at room temperature with a form of rectangular sheets.

    本文言語英語
    ページ(範囲)4669-4681
    ページ数13
    ジャーナルMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
    47
    9
    DOI
    出版ステータス出版済み - 9月 1 2016

    !!!All Science Journal Classification (ASJC) codes

    • 凝縮系物理学
    • 材料力学
    • 金属および合金

    フィンガープリント

    「Scaling up of High-Pressure Sliding (HPS) for Grain Refinement and Superplasticity」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル