Ti-Nb-Ta-Zr system alloys are receiving more attention for biomedical material component applications. However, the deformation behavior of the Ti-Nb-Ta-Zr system has not been evaluated to date. Therefore, the deformation behavior of Ti-Nb-Ta-Zr alloys with different Nb contents was investigated in this study. The behaviors of loading-unloading stress-strain curves of Ti-20Nb-10Ta-5Zr and Ti-25Nb-10Ta-5Zr air-cooled after final heating of the manufacturing process are similar to that obtained in metastable β type titanium alloys that have the shape memory effect. Therefore, the shape memory effect was expected in Ti-20Nb-10Ta-5Zr and Ti-25Nb-10Ta-5Zr alloys. The elastic deformation of Ti-30Nb-10Ta-5Zr disobeyed Hooke's law. However, stress or strain-induced martensite (SIM) is not observed on the loading-unloading stress-strain curve. The deformation mechanism of Ti-25Nb-10Ta-5Zr changes with varying its microstructure. In Ti-25Nb-10Ta-5Zr air-cooled after final heating, the microstructure consisted of an ω phase in a β phase. The stress for inducing martensite in a β phase, σM, was nearly equal to the yielding stress, σy. Therefore, stress-induced martensitic transformation and movement of dislocations occurred together. In Ti-25Nb-10Ta-5Zr water-quenched after final heating of the manufacturing process, the microstructure consisted of a single β phase, where σM is lower than σy. Therefore, stress-induced martensitic transformation occurred before yielding.
|Materials Science and Engineering C
|出版済み - 5月 2005
|Selected Papers Presented at the Materials Science and Technology 2004 Meeting: Titanium for Biomedical, Dental, and Healthcare -
継続期間: 9月 26 2004 → 9月 29 2004
!!!All Science Journal Classification (ASJC) codes