TY - JOUR
T1 - Pressurized water electrolysis using hydrophobic gas diffusion layer with a new electrolyzer cell structure
AU - Vediyappan, Veeramani
AU - Lai, Qiwen
AU - Fujisaki, Takaya
AU - Andrews, John
AU - Sone, Yoshitsugu
AU - Kwati, Leonard
AU - Matsumoto, Hiroshige
N1 - Publisher Copyright:
© 2024
PY - 2024/11
Y1 - 2024/11
N2 - Direct production of pressurized hydrogen through polymer exchange membrane (PEM) water electrolysis without the usage of the external compressor is an industrially important approach to maximize energy efficiency. An additional challenge in conventional water electrolyzers is the lack of separation of the generated gases, hydrogen and oxygen, from water. In this report, we demonstrate the operation of a new water electrolysis cell at high inlet water pressure with the assistance of a hydrophobic gas diffusion layer (hydrophobic-GDL). This configuration allows the gas/water separation to take place at the electrode so that pressurized water-free gases can be the output due to water being injected directly into the membrane as a source of electrolysis for a continuous supply of water it prevents membrane dehydration. Another important feature is also the cell can be operable in a reversible operation by combining with fuel cell operation. The membrane electrode assemblies (MEAs) were prepared using the hydrophobic-GDL, a Nafion membrane, and Pt-C/IrO2 catalysts. Electrolysis experiments were performed at different temperatures with pressurized water (ΔP = 0.05–0.4 MPa based on atmospheric pressure) resulting output was pressurized (0.05–0.4 MPa) hydrogen and oxygen gases. The current densities at 1.6 V of electrolysis voltage were 117, 188, 262 mA cm−2 at 25, 60, and 80 °C, respectively, and the hydrogen and oxygen gas evolution rates were consistent with theoretical values. It was found that increasing water pressure is beneficial to the electrode kinetics and there was an increase in water transport to the electrode surface as well as efficient gas separation and the production of pressurized gases.
AB - Direct production of pressurized hydrogen through polymer exchange membrane (PEM) water electrolysis without the usage of the external compressor is an industrially important approach to maximize energy efficiency. An additional challenge in conventional water electrolyzers is the lack of separation of the generated gases, hydrogen and oxygen, from water. In this report, we demonstrate the operation of a new water electrolysis cell at high inlet water pressure with the assistance of a hydrophobic gas diffusion layer (hydrophobic-GDL). This configuration allows the gas/water separation to take place at the electrode so that pressurized water-free gases can be the output due to water being injected directly into the membrane as a source of electrolysis for a continuous supply of water it prevents membrane dehydration. Another important feature is also the cell can be operable in a reversible operation by combining with fuel cell operation. The membrane electrode assemblies (MEAs) were prepared using the hydrophobic-GDL, a Nafion membrane, and Pt-C/IrO2 catalysts. Electrolysis experiments were performed at different temperatures with pressurized water (ΔP = 0.05–0.4 MPa based on atmospheric pressure) resulting output was pressurized (0.05–0.4 MPa) hydrogen and oxygen gases. The current densities at 1.6 V of electrolysis voltage were 117, 188, 262 mA cm−2 at 25, 60, and 80 °C, respectively, and the hydrogen and oxygen gas evolution rates were consistent with theoretical values. It was found that increasing water pressure is beneficial to the electrode kinetics and there was an increase in water transport to the electrode surface as well as efficient gas separation and the production of pressurized gases.
KW - Hydrogen production
KW - Hydrophobic gas diffusion layer
KW - PEM water electrolysis
KW - Water pressure
UR - http://www.scopus.com/inward/record.url?scp=85202955340&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85202955340&partnerID=8YFLogxK
U2 - 10.1016/j.ssi.2024.116678
DO - 10.1016/j.ssi.2024.116678
M3 - Article
AN - SCOPUS:85202955340
SN - 0167-2738
VL - 416
JO - Solid State Ionics
JF - Solid State Ionics
M1 - 116678
ER -