Power generation characteristics of oxide thermoelectric modules incorporating nanostructured ZnO sintered materials

Takeshi Souma, Michitaka Ohtaki, Kyohei Ohnishi, Masayuki Shigeno, Yasuhiro Ohba, Toshitada Shimozaki

    研究成果: 書籍/レポート タイプへの寄稿会議への寄与

    12 被引用数 (Scopus)

    抄録

    A practical oxide thermoelectric module consisting of 12 pairs of p-NaCo2O4 and nanostructured n-ZnO sintered materials was successfully fabricated by using a diffusion welding technique. By applying a nanostructure using a void forming agency (VFA), the electrical conductivity of the n-ZnO sintered materials were drastically enhanced, leading that the power factor of the materials were dramatically improved. It is revealed that the oxide module can be operated up to 930 K on the hot side temperature. A maximum power output of 52.5 mW was achieved at the temperature condition of T H/TL = 934/479 K, where TH and TL are temperatures at the hot and cold sides of the module, respectively. The details of the power generation characteristics of the present oxide module will be presented and the performance will be discussed with those of our previous and other oxide modules.

    本文言語英語
    ホスト出版物のタイトルProceedings ICT'07 - 26th International Conference on Thermoelectrics
    ページ38-41
    ページ数4
    DOI
    出版ステータス出版済み - 2007
    イベントICT'07 - 26th International Conference on Thermoelectrics - Jeju, 韓国
    継続期間: 6月 3 20076月 7 2007

    出版物シリーズ

    名前International Conference on Thermoelectrics, ICT, Proceedings

    その他

    その他ICT'07 - 26th International Conference on Thermoelectrics
    国/地域韓国
    CityJeju
    Period6/3/076/7/07

    !!!All Science Journal Classification (ASJC) codes

    • 工学一般

    フィンガープリント

    「Power generation characteristics of oxide thermoelectric modules incorporating nanostructured ZnO sintered materials」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル