Pitch-based carbon fibers from coal tar or petroleum residue under the same processing condition

Jiyoung Kim, Ui Su Im, Byungrok Lee, Dong Hyun Peck, Seong Ho Yoon, Doo Hwan Jung

研究成果: ジャーナルへの寄稿学術誌査読

34 被引用数 (Scopus)

抄録

Spinnable pitches and carbon fibers were successfully prepared from petroleum or coal pyrolysis residues. After pyrolysis fuel oil (PFO), slurry oil, and coal tar were simply filtered to eliminate the solid impurities, the characteristics of the raw materials were evaluated by elemental analysis,13C nuclear magnetic resonance spectrometer, matrix-assisted laser desorption/ionization time-of-flight mass spectrometer (MALDI-TOF-MS), and so on. Spinnable pitches were prepared for melt-spinning carbon fiber through a simple distillation under strong nitrogen flow, and further vacuum distillation to obtain a high softening point. Carbon fibers were produced from the above pitches by single-hole melt spinning and additional heat treatment, for oxidization and carbonization. Even though spinnable pitches and carbon fibers were processed under the same conditions, the melt-spinning and properties of the carbon fiber were different depending on the raw materials. A fine carbon fiber could not be prepared from slurry oil, and the different diameter carbon fibers were produced from the PFO and coal tar pitch. These results seem to be closely correlated with the initial characteristics of the raw materials, under this simple processing condition.

本文言語英語
ページ(範囲)72-78
ページ数7
ジャーナルCarbon Letters
19
1
DOI
出版ステータス出版済み - 7月 2016

!!!All Science Journal Classification (ASJC) codes

  • セラミックおよび複合材料
  • 再生可能エネルギー、持続可能性、環境
  • エネルギー工学および電力技術
  • プロセス化学およびプロセス工学
  • 有機化学
  • 無機化学
  • 材料化学

フィンガープリント

「Pitch-based carbon fibers from coal tar or petroleum residue under the same processing condition」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル