メインナビゲーションにスキップ 検索にスキップ メインコンテンツにスキップ

Photoprocessible thermo-sensitive gel actuator for functional microfluidic devices

研究成果: 書籍/レポート タイプへの寄稿会議への寄与

抄録

We present an innovative polymer actuator made of photoprocessible thermo-sensitive gel. The gel, which we call Bioresist, is thermoresponsible biocompatible photoresist. Novelties of this Bioresist are shown as follows. It is possible to fabricate arbitrary 2D pattern using photolithography. Its volume is controlled by only heating. Therefore, it can be applied to the thermally controllable functional microfluidic devices. Herein, we demonstrated this innovative gel as applications of microfluidc components controlled by microheaters. Its properties were evaluated. Firstly, the relationship between expansion rate of Bioresist and temperature was measured. Secondly, the normally closed microvalve was fabricated for the fluid control. Then, the performance of the gel was evaluated. Finally, we applied this microcomponent to the sorter for cells flowing in the microchannel.

本文言語英語
ホスト出版物のタイトル2013 Transducers and Eurosensors XXVII
ホスト出版物のサブタイトルThe 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013
ページ1811-1814
ページ数4
DOI
出版ステータス出版済み - 2013
外部発表はい
イベント2013 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013 - Barcelona, スペイン
継続期間: 6月 16 20136月 20 2013

出版物シリーズ

名前2013 Transducers and Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013

その他

その他2013 17th International Conference on Solid-State Sensors, Actuators and Microsystems, TRANSDUCERS and EUROSENSORS 2013
国/地域スペイン
CityBarcelona
Period6/16/136/20/13

!!!All Science Journal Classification (ASJC) codes

  • ハードウェアとアーキテクチャ
  • 電子工学および電気工学

フィンガープリント

「Photoprocessible thermo-sensitive gel actuator for functional microfluidic devices」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル