Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature

Teruaki Nomiyama; Yasuhiro Mori; Masashi Yoshimi; Youichiro Arai; Yuuji Horie; Tomoyuki Miyazaki; Hisao Kuriyaki; Kazuyoshi Hirakawa

Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature

Teruaki Nomiyama
, Yasuhiro Mori
, Masashi Yoshimi
, Youichiro Arai
, Yuuji Horie
, Tomoyuki Miyazaki
, Hisao Kuriyaki
, Kazuyoshi Hirakawa

電子デバイス工学

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

2 被引用数 (Scopus)

抄録

Polythiophene (PTh) films on carbon fibers (CFs) were applied to an electrode of a photo-rechargeable battery (PRB). The PRB is a battery which can convert photonic energy to electrochemical energy and in situ store it. PTh/CFs electrodes were prepared by electrochemical deposition at different temperatures, 0, 25 and 40 °C. The characteristics of photo-rechargeability were measured with the irradiation of xenon lamp. The surface flatness and the electrical resistivity of PTh/CFs were estimated using the experimental results of the electrochemical impedance. It was found that PTh/CFs prepared at 0 °C had high flatness and low resistivity.

本文言語	英語
ページ（範囲）	304-309
ページ数	6
ジャーナル	Research Reports on Information Science and Electrical Engineering of Kyushu University
巻	2
号	2
出版ステータス	出版済み - 9月 1997

!!!All Science Journal Classification (ASJC) codes

コンピュータサイエンス一般
電子工学および電気工学

他のファイルとリンク

フィンガープリント

「Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature. / Nomiyama, Teruaki; Mori, Yasuhiro; Yoshimi, Masashi その他.
In: Research Reports on Information Science and Electrical Engineering of Kyushu University, Vol. 2, No. 2, 09.1997, p. 304-309.

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

@article{38800539dc22450fade31f5cb431ef8f,

title = "Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature",

abstract = "Polythiophene (PTh) films on carbon fibers (CFs) were applied to an electrode of a photo-rechargeable battery (PRB). The PRB is a battery which can convert photonic energy to electrochemical energy and in situ store it. PTh/CFs electrodes were prepared by electrochemical deposition at different temperatures, 0, 25 and 40 °C. The characteristics of photo-rechargeability were measured with the irradiation of xenon lamp. The surface flatness and the electrical resistivity of PTh/CFs were estimated using the experimental results of the electrochemical impedance. It was found that PTh/CFs prepared at 0 °C had high flatness and low resistivity.",

author = "Teruaki Nomiyama and Yasuhiro Mori and Masashi Yoshimi and Youichiro Arai and Yuuji Horie and Tomoyuki Miyazaki and Hisao Kuriyaki and Kazuyoshi Hirakawa",

year = "1997",

month = sep,

language = "English",

volume = "2",

pages = "304--309",

journal = "Research Reports on Information Science and Electrical Engineering of Kyushu University",

issn = "1342-3819",

publisher = "Kyushu University",

number = "2",

}

TY - JOUR

T1 - Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature

AU - Nomiyama, Teruaki

AU - Mori, Yasuhiro

AU - Yoshimi, Masashi

AU - Arai, Youichiro

AU - Horie, Yuuji

AU - Miyazaki, Tomoyuki

AU - Kuriyaki, Hisao

AU - Hirakawa, Kazuyoshi

PY - 1997/9

Y1 - 1997/9

N2 - Polythiophene (PTh) films on carbon fibers (CFs) were applied to an electrode of a photo-rechargeable battery (PRB). The PRB is a battery which can convert photonic energy to electrochemical energy and in situ store it. PTh/CFs electrodes were prepared by electrochemical deposition at different temperatures, 0, 25 and 40 °C. The characteristics of photo-rechargeability were measured with the irradiation of xenon lamp. The surface flatness and the electrical resistivity of PTh/CFs were estimated using the experimental results of the electrochemical impedance. It was found that PTh/CFs prepared at 0 °C had high flatness and low resistivity.

AB - Polythiophene (PTh) films on carbon fibers (CFs) were applied to an electrode of a photo-rechargeable battery (PRB). The PRB is a battery which can convert photonic energy to electrochemical energy and in situ store it. PTh/CFs electrodes were prepared by electrochemical deposition at different temperatures, 0, 25 and 40 °C. The characteristics of photo-rechargeability were measured with the irradiation of xenon lamp. The surface flatness and the electrical resistivity of PTh/CFs were estimated using the experimental results of the electrochemical impedance. It was found that PTh/CFs prepared at 0 °C had high flatness and low resistivity.

UR - https://www.scopus.com/pages/publications/0031220916

UR - https://www.scopus.com/pages/publications/0031220916#tab=citedBy

M3 - Article

AN - SCOPUS:0031220916

SN - 1342-3819

VL - 2

SP - 304

EP - 309

JO - Research Reports on Information Science and Electrical Engineering of Kyushu University

JF - Research Reports on Information Science and Electrical Engineering of Kyushu University

IS - 2

ER -