PEFCs Using Metallic Ti and Sn Gas Diffusion Layers

研究成果: 書籍/レポート タイプへの寄稿会議への寄与

1 被引用数 (Scopus)

抄録

Porous carbon materials, which are widely used as gas diffusion layer (GDL) in PEFCs, have several issues including high cost and mechanical strength. In order to reduce the cost and thickness of GDLs, we focus on the possible use of metallic Ti and Sn as alternative GDL materials. In this study, Sn/Ti and Sn/Sn GDLs are prepared, which are based on porous Ti or Sn plates coated with Sn layer. Microstructural observations using scanning electron microscope (SEM) confirmed that porous Sn dendrite layer could be formed on the metallic GDLs. Current-voltage measurements of the cells using these materials revealed that the porous structure of the GDLs, on which Sn dendrites were formed, is advantageous to improve electrical contact.

本文言語英語
ホスト出版物のタイトル240th ECS Meeting - Polymer Electrolyte Fuel Cells and Electrolyzers 21 (PEFC and E 21)
出版社IOP Publishing Ltd.
ページ359-369
ページ数11
8
ISBN(電子版)9781607685395
DOI
出版ステータス出版済み - 2021
イベント240th ECS Meeting - Orlando, 米国
継続期間: 10月 10 202110月 14 2021

出版物シリーズ

名前ECS Transactions
番号8
104
ISSN(印刷版)1938-6737
ISSN(電子版)1938-5862

会議

会議240th ECS Meeting
国/地域米国
CityOrlando
Period10/10/2110/14/21

!!!All Science Journal Classification (ASJC) codes

  • 工学一般

フィンガープリント

「PEFCs Using Metallic Ti and Sn Gas Diffusion Layers」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル