Investigations of Cu filling in through-Si via holes using direct electroless plating on CVD-W

F. Inoue, M. Koyanagi, T. Fukushima, K. Yamamoto, S. Tanaka, Z. Wang, S. Shingubara

研究成果: 書籍/レポート タイプへの寄稿会議への寄与

抄録

In order to realize low resistance through-Si via (TSV) electrodes, Cu electroplating is one of the most promising methods. However, with an increase of the aspect ratio of TSV, a formation of conductive seed layer prior to Cu electroplating is becoming more and more difficult. We propose an alternative approach using the electroless plating of Cu, which utilize displacement plating without catalyst. This method is effective for fabricating a low resistance TSV when combined with a barrier layer which is composed of tungsten (W). We found that an addition of Cl ions drastically suppressed the pinch-off at the entrance of the TSV, and it enabled conformal Cu deposition for high aspect ratio TSVs.

本文言語英語
ホスト出版物のタイトルAdvanced Metallization Conference 2008, AMC 2008
ページ507-511
ページ数5
出版ステータス出版済み - 2009
外部発表はい
イベントAdvanced Metallization Conference 2008, AMC 2008 - San Diego, CA, 米国
継続期間: 9月 23 20089月 25 2008

出版物シリーズ

名前Advanced Metallization Conference (AMC)
ISSN(印刷版)1540-1766

その他

その他Advanced Metallization Conference 2008, AMC 2008
国/地域米国
CitySan Diego, CA
Period9/23/089/25/08

!!!All Science Journal Classification (ASJC) codes

  • 材料科学一般
  • 産業および生産工学

フィンガープリント

「Investigations of Cu filling in through-Si via holes using direct electroless plating on CVD-W」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル