Influence of minimum quantity lubrication with Al2O3 nanoparticles on cutting parameters in drilling process

Sofia Fitrina, Budi Kristiawan, Eko Surojo, Agung Tri Wijayanta, Takahiko Miyazaki, Shigeru Koyama

研究成果: 書籍/レポート タイプへの寄稿会議への寄与

7 被引用数 (Scopus)

抄録

Machining is one of the largest and most widely used methods of production segments in industries. In this way, cutting fluids play an important role in minimizing production time, cost, and energy in various machining operations. This paper presents an experimental investigation into minimum quantity lubrication (MQL) with Al2O3 nanoparticles in drilling process of common rail as work material with DPSCM 435H code to analyze its influence on cutting parameters. Al2O3 has been selected for nanoparticles in this study due to its non-toxicity and spherical shapes for enhanced tribological attributes. Experiments were carried out for two different conditions; MQL + nanofluids (250 ml/h) and conventional cutting fluid (15 liters/min). In this work, nanofluid was prepared by adding Al2O3 nanoparticles (13 nm size) into the conventional cutting fluid in the specific proportion of 1.2 vol.%. The experiment results reveal that the performance of Al2O3 nanofluid in term surface roughness is better compared to the conventional cutting fluid, but the result of cutting temperature and chip morphology does not match with the previous experiment because volume fraction of nanofluid is too high. It means the specific proportion of 1.2 vol.% nanofluid is not best volume fraction for getting best cooling properties. This experiment does not focus on variations of volume fraction but on cooling conditions.

本文言語英語
ホスト出版物のタイトル3rd International Conference on Industrial Mechanical, Electrical, and Chemical Engineering
編集者 Fadilah, Adrian Nur, Anatta Wahyu Budiman, Sperisa Distantina, Ari Diana Susanti, Agung Tri Wijayanta
出版社American Institute of Physics Inc.
ISBN(電子版)9780735416239
DOI
出版ステータス出版済み - 2月 9 2018
イベント3rd International Conference on Industrial Mechanical, Electrical, and Chemical Engineering, ICIMECE 2017 - Surakarta, インドネシア
継続期間: 9月 13 20179月 14 2017

出版物シリーズ

名前AIP Conference Proceedings
1931
ISSN(印刷版)0094-243X
ISSN(電子版)1551-7616

その他

その他3rd International Conference on Industrial Mechanical, Electrical, and Chemical Engineering, ICIMECE 2017
国/地域インドネシア
CitySurakarta
Period9/13/179/14/17

!!!All Science Journal Classification (ASJC) codes

  • 物理学および天文学一般

フィンガープリント

「Influence of minimum quantity lubrication with Al2O3 nanoparticles on cutting parameters in drilling process」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル