TY - GEN
T1 - Finite element analysis of vacant tubular members under static loading considering the tip shapes of load
AU - Effendi, Mahmud Kori
AU - Zaitsu, Shuhei
AU - Kawaguchi, Hiromitsu
AU - Kawano, Akihiko
AU - Matsuo, Shintaro
AU - Tsuda, Keigo
AU - Kido, Masae
N1 - Copyright:
Copyright 2014 Elsevier B.V., All rights reserved.
PY - 2014
Y1 - 2014
N2 - FEM analysis of MSC. Marc program is used to simulate the models. Three-dimensional FEM model with contact analysis between deformable body of specimens and rigid body of load are studied. The isotropic material and The Von Mises yield criterion are used and kinematic hardening is used as a flow plasticity model. The effect of various shapes of loading tips is investigated. The load-displacement were established. The results of these works are expected to be a useful reference for analyzing structures under various shapes of loading tips either static or dynamic loading.
AB - FEM analysis of MSC. Marc program is used to simulate the models. Three-dimensional FEM model with contact analysis between deformable body of specimens and rigid body of load are studied. The isotropic material and The Von Mises yield criterion are used and kinematic hardening is used as a flow plasticity model. The effect of various shapes of loading tips is investigated. The load-displacement were established. The results of these works are expected to be a useful reference for analyzing structures under various shapes of loading tips either static or dynamic loading.
UR - http://www.scopus.com/inward/record.url?scp=84904382683&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84904382683&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/AMM.575.497
DO - 10.4028/www.scientific.net/AMM.575.497
M3 - Conference contribution
AN - SCOPUS:84904382683
SN - 9783038351405
T3 - Applied Mechanics and Materials
SP - 497
EP - 500
BT - Materials Engineering and Automatic Control III
PB - Trans Tech Publications Ltd
T2 - 3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014
Y2 - 17 May 2014 through 18 May 2014
ER -