TY - GEN
T1 - Fatigue life properties of circumferentially-notched bar of austenitic stainless steel with various concentration factors
AU - Nagaishi, Naoaki
AU - Matsunaga, Hisao
AU - Yoshikawa, Michio
AU - Yamabe, Junichiro
AU - Okazaki, Saburo
AU - Matsuoka, Saburo
PY - 2018/1/1
Y1 - 2018/1/1
N2 - Fatigue tests were performed using three types of round-bar specimens of Type 304, meta-stable, austenitic stainless steel. The specimens had circumferential notch with stress concentration factors, Kt, of 2, 3 or 6.6. Load controlled fatigue tests were conducted at stress ratio, R, of 0.1 and −1 in ambient air at room temperature. At R of 0.1, fatigue life was decreased with an increase in the stress concentration factor. Conversely, at R of −1, the stress concentration factor had little influence on the fatigue life. To understand the mechanism of the stress ratio effect, local deformation behavior at and beneath the notch root during the fatigue test was computed by means of finite element analysis considering that the plastic constitutive model describes the cyclic stress-strain response.
AB - Fatigue tests were performed using three types of round-bar specimens of Type 304, meta-stable, austenitic stainless steel. The specimens had circumferential notch with stress concentration factors, Kt, of 2, 3 or 6.6. Load controlled fatigue tests were conducted at stress ratio, R, of 0.1 and −1 in ambient air at room temperature. At R of 0.1, fatigue life was decreased with an increase in the stress concentration factor. Conversely, at R of −1, the stress concentration factor had little influence on the fatigue life. To understand the mechanism of the stress ratio effect, local deformation behavior at and beneath the notch root during the fatigue test was computed by means of finite element analysis considering that the plastic constitutive model describes the cyclic stress-strain response.
UR - http://www.scopus.com/inward/record.url?scp=85056832443&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85056832443&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:85056832443
T3 - American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
BT - Materials and Fabrication
PB - American Society of Mechanical Engineers (ASME)
T2 - ASME 2018 Pressure Vessels and Piping Conference, PVP 2018
Y2 - 15 July 2018 through 20 July 2018
ER -