メインナビゲーションにスキップ 検索にスキップ メインコンテンツにスキップ

Fabrication of β-TCP foam: Effects of magnesium oxide as phase stabilizer on its properties

  • Taro Nikaido
  • , Kanji Tsuru
  • , Melvin Munar
  • , Michito Maruta
  • , Shigeki Matsuya
  • , Seiji Nakamura
  • , Kunio Ishikawa

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

19   !!Link opens in a new tab 被引用数 (Scopus)

抄録

Porous β-tricalcium phosphate (β-TCP) has attracted attention as an artificial bone substitute. α-TCP foam that mimics the fully interconnected porous structure of the cancellous bone can be fabricated by a ceramics foam method, which requires sintering at high temperature. However, β-TCP foam could not be fabricated by the ceramics foam method since the sintering temperature required is above the αβ transition temperature. To fabricate the β-TCP foam that mimics the fully interconnected porous structure of cancellous bone, magnesium oxide (MgO) is added as a phase stabilizer. β-TCP foam was obtained when at least 3 mol% MgO was added. Lattice parameter analysis revealed that the MgO as a β-phase stabilizer was incorporated into the lattice of the TCP structure. The porosity of the β-TCP foam containing 3 mol% MgO was 92%, and the compressive strength was approximately 32 kPa. Despite the observed smooth surface and lower porosity of β-TCP foam compared to α-TCP foam, no improvement on the compressive strength of β-TCP foam occurred even by the addition of 3 mol% or more of MgO. Formation of micro-cracks could be one the reasons. These micro-cracks were formed by contraction as a result from growth of adjacent grains.

本文言語英語
ページ(範囲)14245-14250
ページ数6
ジャーナルCeramics International
巻41
号10
DOI
出版ステータス出版済み - 5月 7 2015

!!!All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • セラミックおよび複合材料
  • プロセス化学およびプロセス工学
  • 表面、皮膜および薄膜
  • 材料化学

フィンガープリント

「Fabrication of β-TCP foam: Effects of magnesium oxide as phase stabilizer on its properties」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル