Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm

Taketsune Nakamura; Tenghui Dong; Jun Matsuura; Takanobu Kiss; Kohei Higashikawa; Shigeru Sato; Peihong Zhang

doi:10.1109/TASC.2022.3170854

Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm

Taketsune Nakamura, Tenghui Dong, Jun Matsuura, Takanobu Kiss, Kohei Higashikawa, Shigeru Sato, Peihong Zhang

計測制御工学

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

6 被引用数 (Scopus)

抄録

We report experimental and theoretical results of power generation characteristics of a 1 kW class fully High Temperature Superconducting Induction/Synchronous Generator (HTS-ISG) that consists of a stator winding using REBCO tape and a rotor winding using BSCCO tape. The bending diameter of REBCO stator winding is 20 mm and its average critical current is 90 A at 77 K. As a result of experiments at liquid nitrogen temperature, we succeeded in a power generation test exceeding 500 W. From this result, we could demonstrate the possibility of a small-sized fully superconducting generator.

本文言語	英語
論文番号	5202205
ジャーナル	IEEE Transactions on Applied Superconductivity
巻	32
号	6
DOI	https://doi.org/10.1109/TASC.2022.3170854
出版ステータス	出版済み - 9月 1 2022

!!!All Science Journal Classification (ASJC) codes

電子材料、光学材料、および磁性材料
凝縮系物理学
電子工学および電気工学

文献へのアクセス

10.1109/TASC.2022.3170854

他のファイルとリンク

フィンガープリント

「Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

Nakamura, T., Dong, T., Matsuura, J., Kiss, T., Higashikawa, K., Sato, S., & Zhang, P. (2022). Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm. IEEE Transactions on Applied Superconductivity, 32(6), Article 5202205. https://doi.org/10.1109/TASC.2022.3170854

Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm. / Nakamura, Taketsune; Dong, Tenghui; Matsuura, Jun その他.
In: IEEE Transactions on Applied Superconductivity, Vol. 32, No. 6, 5202205, 01.09.2022.

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

Nakamura, T, Dong, T, Matsuura, J, Kiss, T , Higashikawa, K, Sato, S & Zhang, P 2022, 'Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm', IEEE Transactions on Applied Superconductivity, vol. 32, no. 6, 5202205. https://doi.org/10.1109/TASC.2022.3170854

Nakamura T, Dong T, Matsuura J, Kiss T , Higashikawa K, Sato S その他. Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm. IEEE Transactions on Applied Superconductivity. 2022 9月 1;32(6):5202205. doi: 10.1109/TASC.2022.3170854

@article{0e1343ff424c4e24aad6e878a57fe026,

title = "Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm",

abstract = "We report experimental and theoretical results of power generation characteristics of a 1 kW class fully High Temperature Superconducting Induction/Synchronous Generator (HTS-ISG) that consists of a stator winding using REBCO tape and a rotor winding using BSCCO tape. The bending diameter of REBCO stator winding is 20 mm and its average critical current is 90 A at 77 K. As a result of experiments at liquid nitrogen temperature, we succeeded in a power generation test exceeding 500 W. From this result, we could demonstrate the possibility of a small-sized fully superconducting generator.",

author = "Taketsune Nakamura and Tenghui Dong and Jun Matsuura and Takanobu Kiss and Kohei Higashikawa and Shigeru Sato and Peihong Zhang",

note = "Publisher Copyright: {\textcopyright} 2002-2011 IEEE.",

year = "2022",

month = sep,

day = "1",

doi = "10.1109/TASC.2022.3170854",

language = "English",

volume = "32",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "6",

}

TY - JOUR

T1 - Experimental and Theoretical Study on Power Generation Characteristics of 1 kW Class Fully High Temperature Superconducting Induction/Synchronous Generator Using a Stator Winding With a Bending Diameter of 20 mm

AU - Nakamura, Taketsune

AU - Dong, Tenghui

AU - Matsuura, Jun

AU - Kiss, Takanobu

AU - Higashikawa, Kohei

AU - Sato, Shigeru

AU - Zhang, Peihong

PY - 2022/9/1

Y1 - 2022/9/1

N2 - We report experimental and theoretical results of power generation characteristics of a 1 kW class fully High Temperature Superconducting Induction/Synchronous Generator (HTS-ISG) that consists of a stator winding using REBCO tape and a rotor winding using BSCCO tape. The bending diameter of REBCO stator winding is 20 mm and its average critical current is 90 A at 77 K. As a result of experiments at liquid nitrogen temperature, we succeeded in a power generation test exceeding 500 W. From this result, we could demonstrate the possibility of a small-sized fully superconducting generator.

AB - We report experimental and theoretical results of power generation characteristics of a 1 kW class fully High Temperature Superconducting Induction/Synchronous Generator (HTS-ISG) that consists of a stator winding using REBCO tape and a rotor winding using BSCCO tape. The bending diameter of REBCO stator winding is 20 mm and its average critical current is 90 A at 77 K. As a result of experiments at liquid nitrogen temperature, we succeeded in a power generation test exceeding 500 W. From this result, we could demonstrate the possibility of a small-sized fully superconducting generator.

UR - http://www.scopus.com/inward/record.url?scp=85129374027&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85129374027&partnerID=8YFLogxK

U2 - 10.1109/TASC.2022.3170854

DO - 10.1109/TASC.2022.3170854

M3 - Article

AN - SCOPUS:85129374027

SN - 1051-8223

VL - 32

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 6

M1 - 5202205

ER -