Eutectic grain size and strontium concentration in hypoeutectic aluminium-silicon alloys

Stuart D. McDonald, Kazuhiro Nogita, Arne K. Dahle

研究成果: ジャーナルへの寄稿学術誌査読

39 被引用数 (Scopus)

抄録

Recently it has been shown that modification with strontium causes an increase in the size of eutectic grains. The eutectic grain size increases because there are fewer nucleation events, possibly due to the poisoning of phosphorus-based nuclei that are active in the unmodified alloy. The current paper investigates the effect of strontium concentration on the eutectic grain size. In the aluminium-10 wt.% silicon alloy used in this research, for fixed casting conditions, the eutectic grain size increases as the strontium concentration increases up to approximately 150 ppm, beyond which the grain size is relatively stable. This critical strontium concentration is likely to differ depending on the composition of the base alloy, including the concentration of minor elements and impurities. It is concluded that processing and in-service properties of strontium modified aluminium-silicon castings are likely to be more stable if a minimum critical strontium concentration is exceeded. If operating below this critical strontium concentration exceptional control over composition and casting conditions is required.

本文言語英語
ページ(範囲)184-191
ページ数8
ジャーナルJournal of Alloys and Compounds
422
1-2
DOI
出版ステータス出版済み - 9月 28 2006
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 材料力学
  • 機械工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Eutectic grain size and strontium concentration in hypoeutectic aluminium-silicon alloys」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル