Diesel combustion characteristics of palm oil butyl ester

Yu Ueda, Eiji Kinoshita, Hiroshi Tajima, Kazunori Hamasaki

研究成果: ジャーナルへの寄稿学術誌査読

抄録

In order to reduce the pour point of palm oil biodiesel, palm oil butyl ester (PBE) is made with 1-butanol by transesterification. As a result, the pour point of PBE is 5.0°C and it is lower than that of palm oil methyl ester (PME), 12.5°C. The combustion characteristics and exhaust emissions of PBE are investigated using a direct injection diesel engine, and are compared with PME, rapeseed oil methyl ester (RME) and JIS No. 2 gas oil. The thermal efficiency of PBE is almost the same as those of the other test fuels. PBE has good ignitability as PME. Although HC, CO and smoke emissions of PBE are slightly higher than that of PME, PBE has lower exhaust emissions compared with the gas oil. Also, smoke emission of PBE is almost the same as that of RME. It is concluded that PBE is a good alternative diesel fuel.

本文言語英語
ページ(範囲)1451-1457
ページ数7
ジャーナルNihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
74
6
DOI
出版ステータス出版済み - 6月 2008

!!!All Science Journal Classification (ASJC) codes

  • 凝縮系物理学
  • 機械工学

フィンガープリント

「Diesel combustion characteristics of palm oil butyl ester」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル