Development of temperature controlled bingham semi-solid/fluid isostatic pressing (BIP) method

研究成果: ジャーナルへの寄稿学術誌査読

1 被引用数 (Scopus)

抄録

Bingham semi solid/fluid isostatic pressing (BIP) was developed recently by the author. Advantages of this method are as follows: cracks in powder compacts that are likely to occur because of the mold's springback at the time of unloading can be avoided; the density is almost uniform in the products. On the other hand, it is not easy to form the mold of a complicated structure from wax or the semi solid material, which is of a small yield stress. Accordingly, wax with a higher yield stress is needed. However, this easily induces cracks in the mold itself as well as in the compacts. In this research, therefore a new process, named "the Temperature Controlled BIP" is developed, and the characteristics of this new process are discussed. In this process, we first form a mold by wax of a higher yield stress, and we then raise the temperature of the mold to decrease its yield stress before pressing. We liquefy the mold completely by raising the temperature before unloading and take out the compact.

本文言語英語
ページ(範囲)880-884
ページ数5
ジャーナルFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
53
11
DOI
出版ステータス出版済み - 11月 2006
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 機械工学
  • 産業および生産工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Development of temperature controlled bingham semi-solid/fluid isostatic pressing (BIP) method」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル