Development of one-sided directional printed slot antenna for high-band UWB systems

Satoshi Ijiguchi, Haruichi Kanaya, Daisuke Kanemoto, Keiji Yoshida, Ramesh K. Pokharel, Kuniaki Yoshitomi, Akira Ishikawa, Shugo Fukagawa, Akihiro Tahira

研究成果: 書籍/レポート タイプへの寄稿会議への寄与

7 被引用数 (Scopus)

抄録

A novel design method of one-sided directional printed slot antenna for high-band ultra wide band (UWB) systems is proposed. For realize the one-sided directional radiation, we applied the floating metal layer on the bottom of the antenna substrate. By optimizing the lengths and widths of the antenna slot and substrate, three resonances can be obtained at different frequencies. By independently controlling three different resonances on the slot and antenna substrate, we can realize the wide band impedance matching. The final antenna size is 29 mm 16 mm 1.6mm. Our proposed antenna was fabricated on the FR4 substrate and measured impedance bandwidth is 2.58 GHz from 7.74 to 10.32 GHz. Moreover one-sided directional radiation can be obtained.

本文言語英語
ホスト出版物のタイトル2011 IEEE International Symposium on Antennas and Propagation - Proceedings
ページ1474-1477
ページ数4
DOI
出版ステータス出版済み - 2011
イベント2011 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2011 - Spokane, WA, 米国
継続期間: 7月 3 20117月 8 2011

出版物シリーズ

名前IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
ISSN(印刷版)1522-3965

その他

その他2011 IEEE International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting, APSURSI 2011
国/地域米国
CitySpokane, WA
Period7/3/117/8/11

!!!All Science Journal Classification (ASJC) codes

  • 電子工学および電気工学

フィンガープリント

「Development of one-sided directional printed slot antenna for high-band UWB systems」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル