Development of a one-sided directional thin planar antenna with quarter wavelength top metal

Haruichi Kanaya, K. Tsumura, Ramesh Pokharel, K. Yoshida, A. Ishikawa, S. Fukagawa, A. Tahira

研究成果: 書籍/レポート タイプへの寄稿会議への寄与

抄録

This paper presents the design of thin planar one-sided directional slot antenna on patterned circuit board. Our proposed planar antenna has the matching circuit composed of coplanar waveguide (CPW) transmission line, interdigital gap, a top metal layer and a bottom floating metal layer. In order to realize the one-sided directional properties, the length of the top metal layer is adjusted, and at that time, the bottom metal layer is adjusted to the length that doesn't resonate. The final antenna size of the 300MHz specified low power wireless receiver is 137mm x 61 mm. We also fabricated the one-sided directional slot antenna using FR4, and measured the radiation pattern.

本文言語英語
ホスト出版物のタイトルAPMC 2009 - Asia Pacific Microwave Conference 2009
ページ28-31
ページ数4
DOI
出版ステータス出版済み - 12月 1 2009
イベントAsia Pacific Microwave Conference 2009, APMC 2009 - Singapore, シンガポール
継続期間: 12月 7 200912月 10 2009

出版物シリーズ

名前APMC 2009 - Asia Pacific Microwave Conference 2009

その他

その他Asia Pacific Microwave Conference 2009, APMC 2009
国/地域シンガポール
CitySingapore
Period12/7/0912/10/09

!!!All Science Journal Classification (ASJC) codes

  • ハードウェアとアーキテクチャ
  • 電子工学および電気工学

フィンガープリント

「Development of a one-sided directional thin planar antenna with quarter wavelength top metal」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル