メインナビゲーションにスキップ 検索にスキップ メインコンテンツにスキップ

Continuous recrystallization in austenitic stainless steel after large strain deformation

  • A. Belyakov
  • , T. Sakai
  • , H. Miura
  • , R. Kaibyshev
  • , K. Tsuzaki

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

抄録

Static restoration mechanisms operating during annealing were studied in a 304 steel with strain-induced submicron grain structures. The initial microstructure with an average grain size of about 0.3 μm was developed by large strain deformation at 873 K. Early annealing leads to a full relaxation of high internal stresses associated with non-equilibrium strain-induced grain boundaries, while their boundary misorientations and the average grain size barely change. Further annealing results in a transient recrystallization followed by a normal grain growth. The average grain boundary misorientation increases up to around 45° in the former and becomes constant in the latter. This is associated with the change in the grain boundary misorientation distribution from a characteristic strain-induced one to a near random distribution corresponding to a fully recrystallized state. The annealing processes operating in the strain-induced fine grains take place homogeneously in the whole matrix and can be called continuous recrystallization.

本文言語英語
ページ(範囲)1547-1557
ページ数11
ジャーナルActa Materialia
巻50
号6
DOI
出版ステータス出版済み - 4月 2 2002
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • セラミックおよび複合材料
  • ポリマーおよびプラスチック
  • 金属および合金

フィンガープリント

「Continuous recrystallization in austenitic stainless steel after large strain deformation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル