Change in electrical resistivity of commercial purity aluminium severely plastic deformed

Yoji Miyajima, Shin Ya Komatsu, Masatoshi Mitsuhara, Satoshi Hata, Hideharu Nakashima, Nobuhiro Tsuji

研究成果: ジャーナルへの寄稿学術誌査読

96 被引用数 (Scopus)

抄録

Commercial purity aluminium sheets were severely plastic deformed by accumulative roll bonding (ARB). Changes in electrical resistivity at 77 K and microstructure during the ARB process were traced up to 12 cycles, which corresponded to an equivalent strain of 10. The resistivity at 77 K increased with increasing number of ARB cycles, then saturated after about the sixth ARB cycle with a maximum increment of resistivity from starting material of about 1.1 n m. Since lattice defects affect the resistivity of metals, the internal dislocation density and the density of grain boundaries were evaluated from scanning transmission electron microscopy images using Ham's method and grain boundary maps obtained from electron back-scattering diffraction, respectively. The relationship between the change in resistivity and the lattice defects is discussed.

本文言語英語
ページ(範囲)4475-4488
ページ数14
ジャーナルPhilosophical Magazine
90
34
DOI
出版ステータス出版済み - 11月 2010

!!!All Science Journal Classification (ASJC) codes

  • 凝縮系物理学

フィンガープリント

「Change in electrical resistivity of commercial purity aluminium severely plastic deformed」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル