Blade rows interaction in contra-rotating axial flow pump designed with different rotational speed concept

L. L. Cao, S. Watanabe, T. Imanishi, H. Yoshimura, A. Furukawa

研究成果: ジャーナルへの寄稿会議記事査読

5 被引用数 (Scopus)


The contra-rotating axial flow pump consisiting of counter-rotating tandem rotors has been expermentally confirmed with better performances than the conventional axial flow pump, but it is known to suffer from the significant potential interaction between the counter-rotating blade rows, which is responsible for the repetitive stresses and unfavourable to the reliable operation. Consequently, to improve the realiability of contra-rotating axial flow pump including the reduction of the blade rows interaction, a new type of rear rotor was designed in the previous study by the rotational speed optimization methodology with some additional considerations. In the present study, to understand the effectiveness of the new design method, instantaneous static pressure fluctuations on the casing wall under the design and off design conditions are investigated by means of experimental and numerical simulation methods. The Fourier analysis is employed to process the data obtained from experiments and numerical simulations, and the axial distribution of the Blade Passing Frequency (BPF) amplitude is obtained. The new rear rotor shows weakened BPF amplitude both upstream and downstream especially at the positions between the two blade rows in both CFD and EFD analyses, implying the reduced blade rows interaction with the new rear rotor.

ジャーナルIOP Conference Series: Materials Science and Engineering
出版ステータス出版済み - 2013
イベント6th International Conference on Pumps and Fans with Compressors and Wind Turbines, ICPF 2013 - Beijing, 中国
継続期間: 9月 19 20139月 22 2013

!!!All Science Journal Classification (ASJC) codes

  • 材料科学一般
  • 工学一般


「Blade rows interaction in contra-rotating axial flow pump designed with different rotational speed concept」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。