All-solid-state lithium secondary battery with Li2 S-C composite positive electrode prepared by spark-plasma-sintering process

Tomonari Takeuchi, Hiroyuki Kageyama, Koji Nakanishi, Mitsuharu Tabuchi, Hikari Sakaebe, Toshiaki Ohta, Hiroshi Senoh, Tetsuo Sakai, Kuniaki Tatsumi

研究成果: ジャーナルへの寄稿学術誌査読

96 被引用数 (Scopus)

抄録

Electrochemically active lithium sulfide-carbon (Li2 S-C) composite positive electrodes, prepared by the spark plasma sintering process, were applied to all-solid-state lithium secondary batteries with a Li3 PO4 - Li2 S- SiS2 glass electrolyte. The electrochemical tests demonstrated that In/ Li2 S-C cells showed the initial charge and discharge capacities of ca. 1010 and 920 mAh g-1 - Li2 S, respectively, which showed higher discharge capacity and coulombic efficiency (ca. 91%) than the Li/ Li2 S-C cells with nonaqueous liquid electrolytes (ca. 200-380 mAh g-1 - Li2 S and ca. 27%, respectively). The ex situ S K-edge X-ray absorption fine structure measurements suggested the appearance and disappearance of elemental sulfur in the positive electrodes after charging and discharging, respectively, indicating that the ideal electrochemical reaction Li2S 2Li+S proceeded in the present all-solid-state cells. Such ideal electrochemical reaction, due probably to the suppression of the dissolution of Li2 S in the form of polysulfides into the electrolytes, would result in higher coulombic efficiency and discharge capacity as compared with those of the liquid-electrolyte cells.

本文言語英語
ページ(範囲)A1196-A1201
ジャーナルJournal of the Electrochemical Society
157
11
DOI
出版ステータス出版済み - 2010
外部発表はい

!!!All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 材料化学
  • 表面、皮膜および薄膜
  • 電気化学
  • 再生可能エネルギー、持続可能性、環境

フィンガープリント

「All-solid-state lithium secondary battery with Li2 S-C composite positive electrode prepared by spark-plasma-sintering process」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル