メインナビゲーションにスキップ 検索にスキップ メインコンテンツにスキップ

A 100 Gbaud On-off-Keying Silicon-Polymer Hybrid Modulator Operating at up to 110°C

研究成果: ジャーナルへの寄稿 › 学術誌 › 査読

19   !!Link opens in a new tab 被引用数 (Scopus)

抄録

We demonstrate 100-Gbaud on-off-keying (OOK) transmission driven at a low voltage using an electro-optic (EO) polymer modulator combined with a silicon Mach-Zehnder interferometer waveguide. Various types of organic-and polymer-based modulators have been reported to perform efficient EO modulation and high-speed data transmission at over 100 Gbaud. However, there are critical concerns regarding the practical application of polymer devices in terms of environmental stability. In particular, long-term thermal storage and stability during operation require improvements before EO polymer modulators can be applied in practical systems. We have developed an EO polymer with enhanced thermophysical stability and used it to fabricate an efficient EO polymer modulator. In this study we extend our earlier work on high-speed EO polymer modulators by performing fiber-link 100-Gbaud OOK transmission at various operating temperatures. A thermal stability test revealed that the EO polymer modulator can survive higherature exposure up to 110°C. Error-free signal transmissions over a distance of 2.0 km was successfully demonstrated with a driving voltage of 1.9 Vpp and a bit error rate below the 7% overhead forward error correction threshold. The driving voltage, bandwidth, bit error rate, and fiber-link performance of the device are presented.

本文言語英語
ページ(範囲)1507-1510
ページ数4
ジャーナルIEEE Photonics Technology Letters
巻33
号24
DOI
出版ステータス出版済み - 12月 15 2021

!!!All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 原子分子物理学および光学
  • 電子工学および電気工学

フィンガープリント

「A 100 Gbaud On-off-Keying Silicon-Polymer Hybrid Modulator Operating at up to 110°C」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル