Winding design study of superconducting 10 T dipoles for a synchrotron

K. Ishibashi; A. D. McInturff

doi:10.1109/TMAG.1983.1062497

Winding design study of superconducting 10 T dipoles for a synchrotron

K. Ishibashi, A. D. McInturff

Applied Nuclear Physics

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

A comparative design study was made for windings of a superconducting 10 T dipole magnet, which could be used for a future large accelerator. Calculations were done for different magnet winding design types; given a few simplifying assumptions, their general magnetic and mechanical parameters were obtained. The four shell configuration seemed to show the most promise of all the magnet designs considered for a 10 T small aperture (5 cm) dipole magnet.

Original language	English
Pages (from-to)	1364-1367
Number of pages	4
Journal	IEEE Transactions on Magnetics
Volume	19
Issue number	3
DOIs	https://doi.org/10.1109/TMAG.1983.1062497
Publication status	Published - May 1983

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Electrical and Electronic Engineering

Access to Document

10.1109/TMAG.1983.1062497

Cite this

@article{6b257d7adfc5457092604e086e2c1dcc,

title = "Winding design study of superconducting 10 T dipoles for a synchrotron",

abstract = "A comparative design study was made for windings of a superconducting 10 T dipole magnet, which could be used for a future large accelerator. Calculations were done for different magnet winding design types; given a few simplifying assumptions, their general magnetic and mechanical parameters were obtained. The four shell configuration seemed to show the most promise of all the magnet designs considered for a 10 T small aperture (5 cm) dipole magnet.",

author = "K. Ishibashi and McInturff, {A. D.}",

year = "1983",

month = may,

doi = "10.1109/TMAG.1983.1062497",

language = "English",

volume = "19",

pages = "1364--1367",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "3",

}

TY - JOUR

T1 - Winding design study of superconducting 10 T dipoles for a synchrotron

AU - Ishibashi, K.

AU - McInturff, A. D.

PY - 1983/5

Y1 - 1983/5

N2 - A comparative design study was made for windings of a superconducting 10 T dipole magnet, which could be used for a future large accelerator. Calculations were done for different magnet winding design types; given a few simplifying assumptions, their general magnetic and mechanical parameters were obtained. The four shell configuration seemed to show the most promise of all the magnet designs considered for a 10 T small aperture (5 cm) dipole magnet.

AB - A comparative design study was made for windings of a superconducting 10 T dipole magnet, which could be used for a future large accelerator. Calculations were done for different magnet winding design types; given a few simplifying assumptions, their general magnetic and mechanical parameters were obtained. The four shell configuration seemed to show the most promise of all the magnet designs considered for a 10 T small aperture (5 cm) dipole magnet.

UR - http://www.scopus.com/inward/record.url?scp=0020125003&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0020125003&partnerID=8YFLogxK

U2 - 10.1109/TMAG.1983.1062497

DO - 10.1109/TMAG.1983.1062497

M3 - Article

AN - SCOPUS:0020125003

SN - 0018-9464

VL - 19

SP - 1364

EP - 1367

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

IS - 3

ER -

Winding design study of superconducting 10 T dipoles for a synchrotron

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this