Ultrasonic treatment to improve the quality of recycled pulp fiber

Daisuke Tatsumi, Takashi Higashihara, Shin'ya Kawamura, Takayoshi Matsumoto

Research output: Contribution to journalArticlepeer-review

36 Citations (Scopus)


The effect of ultrasound on the quality of recycled fibers was investigated. Ultrasound was applied to recycled pulp fiber suspension before ink removal by conventional flotation. The ultrasonic treatment induced an increase in the sedimentation volume of the fiber, which implies that the flexibility and bulkiness of the fiber increase. The water retention value of the ultrasonically treated fiber recovered from the loss caused by the recycling. These facts are due to a beating effect of the treatment. The paper sheets prepared from the ultrasonically treated fiber suspension showed higher sheet density, tensile strength, and brightness than that from an untreated fiber suspension. The process, which consists of ultrasonic treatment for 1 min following flotation deinking, requires about 1.4 times as much energy as the conventional flotation deinking process, but it induced 20% improvement in brightness. The results indicate that the ultrasonic treatment is effective in improving recycled fiber quality.

Original languageEnglish
Pages (from-to)405-409
Number of pages5
JournalJournal of Wood Science
Issue number5
Publication statusPublished - 2000
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Forestry
  • Biomaterials


Dive into the research topics of 'Ultrasonic treatment to improve the quality of recycled pulp fiber'. Together they form a unique fingerprint.

Cite this