Tribological properties of austenitic stainless steel in pressurized hydrogen up to 40 MPa

Kanao Fukuda; Yoshinori Sawae; Eiichi Miyakoshi; Masaaki Hashimoto; Hiroyoshi Tanaka; Hideki Watanabe; Shunichiro Doi; Joichi Sugimura

doi:10.1115/IJTC2010-41234

Tribological properties of austenitic stainless steel in pressurized hydrogen up to 40 MPa

Kanao Fukuda, Yoshinori Sawae, Eiichi Miyakoshi, Masaaki Hashimoto, Hiroyoshi Tanaka, Hideki Watanabe, Shunichiro Doi, Joichi Sugimura

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4 Citations (Scopus)

Abstract

The tribological properties of austenitic stainless steel (JIS SUS316L) were studied in pressurized hydrogen, i.e. 0.3, 10 and 40 MPa. The coefficient of friction was small under all the conditions tested in this study by comparison with data obtained previously at the standard hydrogen pressure (0.1MPa). The specific wear rates decreased with an increase in the atmospheric hydrogen pressure.

Original language	English
Title of host publication	STLE/ASME 2010 International Joint Tribology Conference, IJTC2010
Pages	243-245
Number of pages	3
DOIs	https://doi.org/10.1115/IJTC2010-41234
Publication status	Published - 2010
Event	STLE/ASME 2010 International Joint Tribology Conference, IJTC2010 - San Francisco, CA, United States Duration: Oct 17 2010 → Oct 20 2010

Publication series

Name	American Society of Mechanical Engineers, Tribology Division, TRIB

Other

Other	STLE/ASME 2010 International Joint Tribology Conference, IJTC2010
Country/Territory	United States
City	San Francisco, CA
Period	10/17/10 → 10/20/10

All Science Journal Classification (ASJC) codes

Mechanical Engineering
General Materials Science

Access to Document

10.1115/IJTC2010-41234

Cite this

Fukuda, K., Sawae, Y., Miyakoshi, E., Hashimoto, M., Tanaka, H., Watanabe, H., Doi, S., & Sugimura, J. (2010). Tribological properties of austenitic stainless steel in pressurized hydrogen up to 40 MPa. In STLE/ASME 2010 International Joint Tribology Conference, IJTC2010 (pp. 243-245). (American Society of Mechanical Engineers, Tribology Division, TRIB). https://doi.org/10.1115/IJTC2010-41234

Tribological properties of austenitic stainless steel in pressurized hydrogen up to 40 MPa. / Fukuda, Kanao; Sawae, Yoshinori; Miyakoshi, Eiichi et al.
STLE/ASME 2010 International Joint Tribology Conference, IJTC2010. 2010. p. 243-245 (American Society of Mechanical Engineers, Tribology Division, TRIB).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Fukuda, K, Sawae, Y, Miyakoshi, E, Hashimoto, M, Tanaka, H, Watanabe, H, Doi, S & Sugimura, J 2010, Tribological properties of austenitic stainless steel in pressurized hydrogen up to 40 MPa. in STLE/ASME 2010 International Joint Tribology Conference, IJTC2010. American Society of Mechanical Engineers, Tribology Division, TRIB, pp. 243-245, STLE/ASME 2010 International Joint Tribology Conference, IJTC2010, San Francisco, CA, United States, 10/17/10. https://doi.org/10.1115/IJTC2010-41234

@inproceedings{9c3b805e06f549f2b9cc26e31b29f6ff,

title = "Tribological properties of austenitic stainless steel in pressurized hydrogen up to 40 MPa",

abstract = "The tribological properties of austenitic stainless steel (JIS SUS316L) were studied in pressurized hydrogen, i.e. 0.3, 10 and 40 MPa. The coefficient of friction was small under all the conditions tested in this study by comparison with data obtained previously at the standard hydrogen pressure (0.1MPa). The specific wear rates decreased with an increase in the atmospheric hydrogen pressure.",

author = "Kanao Fukuda and Yoshinori Sawae and Eiichi Miyakoshi and Masaaki Hashimoto and Hiroyoshi Tanaka and Hideki Watanabe and Shunichiro Doi and Joichi Sugimura",

year = "2010",

doi = "10.1115/IJTC2010-41234",

language = "English",

isbn = "9780791844199",

series = "American Society of Mechanical Engineers, Tribology Division, TRIB",

pages = "243--245",

booktitle = "STLE/ASME 2010 International Joint Tribology Conference, IJTC2010",

note = "STLE/ASME 2010 International Joint Tribology Conference, IJTC2010 ; Conference date: 17-10-2010 Through 20-10-2010",

}

TY - GEN

T1 - Tribological properties of austenitic stainless steel in pressurized hydrogen up to 40 MPa

AU - Fukuda, Kanao

AU - Sawae, Yoshinori

AU - Miyakoshi, Eiichi

AU - Hashimoto, Masaaki

AU - Tanaka, Hiroyoshi

AU - Watanabe, Hideki

AU - Doi, Shunichiro

AU - Sugimura, Joichi

PY - 2010

Y1 - 2010

N2 - The tribological properties of austenitic stainless steel (JIS SUS316L) were studied in pressurized hydrogen, i.e. 0.3, 10 and 40 MPa. The coefficient of friction was small under all the conditions tested in this study by comparison with data obtained previously at the standard hydrogen pressure (0.1MPa). The specific wear rates decreased with an increase in the atmospheric hydrogen pressure.

AB - The tribological properties of austenitic stainless steel (JIS SUS316L) were studied in pressurized hydrogen, i.e. 0.3, 10 and 40 MPa. The coefficient of friction was small under all the conditions tested in this study by comparison with data obtained previously at the standard hydrogen pressure (0.1MPa). The specific wear rates decreased with an increase in the atmospheric hydrogen pressure.

UR - http://www.scopus.com/inward/record.url?scp=80054735131&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80054735131&partnerID=8YFLogxK

U2 - 10.1115/IJTC2010-41234

DO - 10.1115/IJTC2010-41234

M3 - Conference contribution

AN - SCOPUS:80054735131

SN - 9780791844199

T3 - American Society of Mechanical Engineers, Tribology Division, TRIB

SP - 243

EP - 245

BT - STLE/ASME 2010 International Joint Tribology Conference, IJTC2010

T2 - STLE/ASME 2010 International Joint Tribology Conference, IJTC2010

Y2 - 17 October 2010 through 20 October 2010

ER -

Tribological properties of austenitic stainless steel in pressurized hydrogen up to 40 MPa

Abstract

Publication series

Other

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this