Superconducting properties in SmBa2Cu3Oy films with high density of BaHfO3 nanorods fabricated with a seed layer

S. Miura, Y. Yoshida, Y. Ichino, A. Tsuruta, K. Matsumoto, A. Ichinose, S. Awaji

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)


A high density of BaMO3 (BMO) nanorods within a REBa2Cu3Oy (REBCO) film can be generated by heavy doping of the BMO. This is very effective in improving superconducting properties in high magnetic fields. However, heavy doping causes a significant Tc reduction. Introduction of a high density of BMO nanorods into REBCO films without reduction in Tc is required. To this end, we deposited SmBa2Cu3Oy (SmBCO) films with various amount of BaHfO3 (BHO) by a pulsed laser deposition (PLD) method using a seed-layer technique and a low-temperature growth (LTG) technique. Using this technique, we can fabricate a purely c-axis-oriented SmBCO film even at low substrate temperatures Ts. The SmBCO films with BHO were fabricated at low Ts of 750 °C without heavy doping of BHO. As a result, the BHO nanorods became thinner and denser than those within SmBCO films fabricated by conventional PLD methods at high Ts. The maximum density was 4780/μm2, and the Bphi of the film reached 9.9 T. These samples showed high Tc (> 90 K). We have therefore successfully fabricated high-Tc SmBCO films with high densities of BHO nanorods using the LTG technique.

Original languageEnglish
Article number7001644
JournalIEEE Transactions on Applied Superconductivity
Issue number3
Publication statusPublished - Jun 1 2015
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering


Dive into the research topics of 'Superconducting properties in SmBa2Cu3Oy films with high density of BaHfO3 nanorods fabricated with a seed layer'. Together they form a unique fingerprint.

Cite this