TY - JOUR
T1 - Pyrolysis of propane under vacuum carburizing conditions
T2 - An experimental and modeling study
AU - Khan, R. U.
AU - Bajohr, S.
AU - Buchholz, D.
AU - Reimert, R.
AU - Minh, H. D.
AU - Norinaga, K.
AU - Janardhanan, V. M.
AU - Tischer, S.
AU - Deutschmann, O.
PY - 2008/3
Y1 - 2008/3
N2 - Propane has been pyrolyzed in a flow reactor system at different temperatures ranging from 640° C to 1010° C and at 8 mbar of partial pressure which are typical vacuum carburizing conditions for steel. Nitrogen was used as a carrier gas. The products of pyrolysis were collected and analyzed by gas chromatography. The reactor was numerically simulated by 1D and 2D flow models coupled to a detailed gas phase reaction mechanism. The gas atmosphere composition has been predicted under the conditions of vacuum carburizing of steel.
AB - Propane has been pyrolyzed in a flow reactor system at different temperatures ranging from 640° C to 1010° C and at 8 mbar of partial pressure which are typical vacuum carburizing conditions for steel. Nitrogen was used as a carrier gas. The products of pyrolysis were collected and analyzed by gas chromatography. The reactor was numerically simulated by 1D and 2D flow models coupled to a detailed gas phase reaction mechanism. The gas atmosphere composition has been predicted under the conditions of vacuum carburizing of steel.
UR - http://www.scopus.com/inward/record.url?scp=39149120809&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=39149120809&partnerID=8YFLogxK
U2 - 10.1016/j.jaap.2007.09.012
DO - 10.1016/j.jaap.2007.09.012
M3 - Article
AN - SCOPUS:39149120809
SN - 0165-2370
VL - 81
SP - 148
EP - 156
JO - Journal of Analytical and Applied Pyrolysis
JF - Journal of Analytical and Applied Pyrolysis
IS - 2
ER -