Prototype evaluation of over 10W/cm3 high power density converter for 400V-DC power distribution system in data center

Seiya Abe; Yoichi Ishizuka; Tamotsu Ninomiya; Sihun Yang; Masahito Shoyama; Masato Kaga

doi:10.1109/PEDS.2013.6527216

Prototype evaluation of over 10W/cm³ high power density converter for 400V-DC power distribution system in data center

Seiya Abe, Yoichi Ishizuka, Tamotsu Ninomiya, Sihun Yang, Masahito Shoyama, Masato Kaga

Applied Energy Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

Abstract

This paper presents the high power density and high efficiency DC-DC converter for 400V-DC power distribution system. The full-bridge converter is used for typical topology. However, there are some problems such as surge voltage occurrence. Here, the miniaturization of isolated DC-DC converter using the LLC resonant converter which can achieve soft-switching operation without auxiliary circuit is considered. The prototype test circuit is evaluated by experimentally. As a result, the high power density of 12.5W/cm³ and high efficiency of over 95% is achieved.

Original language	English
Title of host publication	2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013
Pages	1280-1284
Number of pages	5
DOIs	https://doi.org/10.1109/PEDS.2013.6527216
Publication status	Published - 2013
Event	2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013 - Kitakyushu, Japan Duration: Apr 22 2013 → Apr 25 2013

Publication series

Name	Proceedings of the International Conference on Power Electronics and Drive Systems

Other

Other	2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013
Country/Territory	Japan
City	Kitakyushu
Period	4/22/13 → 4/25/13

All Science Journal Classification (ASJC) codes

Electrical and Electronic Engineering

Access to Document

10.1109/PEDS.2013.6527216

Cite this

Abe, S., Ishizuka, Y., Ninomiya, T., Yang, S., Shoyama, M., & Kaga, M. (2013). Prototype evaluation of over 10W/cm³ high power density converter for 400V-DC power distribution system in data center. In 2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013 (pp. 1280-1284). Article 6527216 (Proceedings of the International Conference on Power Electronics and Drive Systems). https://doi.org/10.1109/PEDS.2013.6527216

Prototype evaluation of over 10W/cm³ high power density converter for 400V-DC power distribution system in data center. / Abe, Seiya; Ishizuka, Yoichi; Ninomiya, Tamotsu et al.
2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013. 2013. p. 1280-1284 6527216 (Proceedings of the International Conference on Power Electronics and Drive Systems).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abe, S, Ishizuka, Y, Ninomiya, T, Yang, S, Shoyama, M & Kaga, M 2013, Prototype evaluation of over 10W/cm³ high power density converter for 400V-DC power distribution system in data center. in 2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013., 6527216, Proceedings of the International Conference on Power Electronics and Drive Systems, pp. 1280-1284, 2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013, Kitakyushu, Japan, 4/22/13. https://doi.org/10.1109/PEDS.2013.6527216

Abe S, Ishizuka Y, Ninomiya T, Yang S, Shoyama M, Kaga M. Prototype evaluation of over 10W/cm³ high power density converter for 400V-DC power distribution system in data center. In 2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013. 2013. p. 1280-1284. 6527216. (Proceedings of the International Conference on Power Electronics and Drive Systems). doi: 10.1109/PEDS.2013.6527216

Abe, Seiya ; Ishizuka, Yoichi ; Ninomiya, Tamotsu et al. / Prototype evaluation of over 10W/cm³ high power density converter for 400V-DC power distribution system in data center. 2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013. 2013. pp. 1280-1284 (Proceedings of the International Conference on Power Electronics and Drive Systems).

@inproceedings{8fcd90bae6e54cc687714609fb7f647b,

title = "Prototype evaluation of over 10W/cm3 high power density converter for 400V-DC power distribution system in data center",

abstract = "This paper presents the high power density and high efficiency DC-DC converter for 400V-DC power distribution system. The full-bridge converter is used for typical topology. However, there are some problems such as surge voltage occurrence. Here, the miniaturization of isolated DC-DC converter using the LLC resonant converter which can achieve soft-switching operation without auxiliary circuit is considered. The prototype test circuit is evaluated by experimentally. As a result, the high power density of 12.5W/cm3 and high efficiency of over 95% is achieved.",

author = "Seiya Abe and Yoichi Ishizuka and Tamotsu Ninomiya and Sihun Yang and Masahito Shoyama and Masato Kaga",

year = "2013",

doi = "10.1109/PEDS.2013.6527216",

language = "English",

isbn = "9781467317900",

series = "Proceedings of the International Conference on Power Electronics and Drive Systems",

pages = "1280--1284",

booktitle = "2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013",

note = "2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013 ; Conference date: 22-04-2013 Through 25-04-2013",

}

TY - GEN

T1 - Prototype evaluation of over 10W/cm3 high power density converter for 400V-DC power distribution system in data center

AU - Abe, Seiya

AU - Ishizuka, Yoichi

AU - Ninomiya, Tamotsu

AU - Yang, Sihun

AU - Shoyama, Masahito

AU - Kaga, Masato

PY - 2013

Y1 - 2013

N2 - This paper presents the high power density and high efficiency DC-DC converter for 400V-DC power distribution system. The full-bridge converter is used for typical topology. However, there are some problems such as surge voltage occurrence. Here, the miniaturization of isolated DC-DC converter using the LLC resonant converter which can achieve soft-switching operation without auxiliary circuit is considered. The prototype test circuit is evaluated by experimentally. As a result, the high power density of 12.5W/cm3 and high efficiency of over 95% is achieved.

AB - This paper presents the high power density and high efficiency DC-DC converter for 400V-DC power distribution system. The full-bridge converter is used for typical topology. However, there are some problems such as surge voltage occurrence. Here, the miniaturization of isolated DC-DC converter using the LLC resonant converter which can achieve soft-switching operation without auxiliary circuit is considered. The prototype test circuit is evaluated by experimentally. As a result, the high power density of 12.5W/cm3 and high efficiency of over 95% is achieved.

UR - http://www.scopus.com/inward/record.url?scp=84880712747&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84880712747&partnerID=8YFLogxK

U2 - 10.1109/PEDS.2013.6527216

DO - 10.1109/PEDS.2013.6527216

M3 - Conference contribution

AN - SCOPUS:84880712747

SN - 9781467317900

T3 - Proceedings of the International Conference on Power Electronics and Drive Systems

SP - 1280

EP - 1284

BT - 2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013

T2 - 2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013

Y2 - 22 April 2013 through 25 April 2013

ER -