Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics  (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy)

Shigeru Hamada; Taka-aki Kawazoe; Komei Hayashi; Harumi Morita; Mitsuji Ueda; Michiru Sakamoto; Hiroshi Noguchi

doi:10.1299/jmmp.5.409

Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy)

Shigeru Hamada, Taka-aki Kawazoe, Komei Hayashi, Harumi Morita, Mitsuji Ueda, Michiru Sakamoto, Hiroshi Noguchi

Strength of materials

Research output: Contribution to journal › Article › peer-review

Abstract

The non-combustible Mg alloy is useful as a structural material because of its high specific strength and high ignition point, but its suitable welding conditions have not been established for manufacturing floors. In this study, a simple evaluation method for the fatigue limit characteristics of a welded joint was proposed using the edge shape of the welding bead geometry, the internal defect size and the material characteristics. Moreover, the welding condition parameter ranges to insure a stable fatigue limit for the TIG butt joint of a non-combustible Mg alloy were proposed using this method.

Original language	English
Pages (from-to)	409-424
Number of pages	16
Journal	Journal of Solid Mechanics and Materials Engineering
Volume	5
Issue number	8
DOIs	https://doi.org/10.1299/jmmp.5.409
Publication status	Published - 2011

Access to Document

10.1299/jmmp.5.409

https://doi.org/10.1299/jmmp.5.409

Fingerprint

Dive into the research topics of 'Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy)'. Together they form a unique fingerprint.

Cite this

Hamada, S., Kawazoe, T., Hayashi, K., Morita, H., Ueda, M., Sakamoto, M., & Noguchi, H. (2011). Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy). Journal of Solid Mechanics and Materials Engineering, 5(8), 409-424. https://doi.org/10.1299/jmmp.5.409

Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy). / Hamada, Shigeru; Kawazoe, Taka-aki; Hayashi, Komei et al.
In: Journal of Solid Mechanics and Materials Engineering, Vol. 5, No. 8, 2011, p. 409-424.

Research output: Contribution to journal › Article › peer-review

Hamada, S, Kawazoe, T, Hayashi, K, Morita, H, Ueda, M, Sakamoto, M & Noguchi, H 2011, 'Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy)', Journal of Solid Mechanics and Materials Engineering, vol. 5, no. 8, pp. 409-424. https://doi.org/10.1299/jmmp.5.409

Hamada S, Kawazoe T, Hayashi K, Morita H, Ueda M, Sakamoto M et al. Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy). Journal of Solid Mechanics and Materials Engineering. 2011;5(8):409-424. doi: 10.1299/jmmp.5.409

Hamada, Shigeru ; Kawazoe, Taka-aki ; Hayashi, Komei et al. / Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report : Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy). In: Journal of Solid Mechanics and Materials Engineering. 2011 ; Vol. 5, No. 8. pp. 409-424.

@article{79ca34c2d71b456fa14899eb36ff6b17,

title = "Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy)",

abstract = "The non-combustible Mg alloy is useful as a structural material because of its high specific strength and high ignition point, but its suitable welding conditions have not been established for manufacturing floors. In this study, a simple evaluation method for the fatigue limit characteristics of a welded joint was proposed using the edge shape of the welding bead geometry, the internal defect size and the material characteristics. Moreover, the welding condition parameter ranges to insure a stable fatigue limit for the TIG butt joint of a non-combustible Mg alloy were proposed using this method.",

author = "Shigeru Hamada and Taka-aki Kawazoe and Komei Hayashi and Harumi Morita and Mitsuji Ueda and Michiru Sakamoto and Hiroshi Noguchi",

year = "2011",

doi = "10.1299/jmmp.5.409",

language = "English",

volume = "5",

pages = "409--424",

journal = "Journal of Solid Mechanics and Materials Engineering",

issn = "1880-9871",

publisher = "The Japan Society of Mechanical Engineers",

number = "8",

}

TY - JOUR

T1 - Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report

T2 - Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy)

AU - Hamada, Shigeru

AU - Kawazoe, Taka-aki

AU - Hayashi, Komei

AU - Morita, Harumi

AU - Ueda, Mitsuji

AU - Sakamoto, Michiru

AU - Noguchi, Hiroshi

PY - 2011

Y1 - 2011

N2 - The non-combustible Mg alloy is useful as a structural material because of its high specific strength and high ignition point, but its suitable welding conditions have not been established for manufacturing floors. In this study, a simple evaluation method for the fatigue limit characteristics of a welded joint was proposed using the edge shape of the welding bead geometry, the internal defect size and the material characteristics. Moreover, the welding condition parameter ranges to insure a stable fatigue limit for the TIG butt joint of a non-combustible Mg alloy were proposed using this method.

AB - The non-combustible Mg alloy is useful as a structural material because of its high specific strength and high ignition point, but its suitable welding conditions have not been established for manufacturing floors. In this study, a simple evaluation method for the fatigue limit characteristics of a welded joint was proposed using the edge shape of the welding bead geometry, the internal defect size and the material characteristics. Moreover, the welding condition parameter ranges to insure a stable fatigue limit for the TIG butt joint of a non-combustible Mg alloy were proposed using this method.

U2 - 10.1299/jmmp.5.409

DO - 10.1299/jmmp.5.409

M3 - Article

SN - 1880-9871

VL - 5

SP - 409

EP - 424

JO - Journal of Solid Mechanics and Materials Engineering

JF - Journal of Solid Mechanics and Materials Engineering

IS - 8

ER -