Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy)

Shigeru Hamada; Taka Aki Kawazoe; Komei Hayashi; Harumi Morita; Mitsuji Ueda; Michiru Sakamoto; Hiroshi Noguchi

doi:10.1299/kikaia.76.1626

Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy)

Shigeru Hamada, Taka Aki Kawazoe, Komei Hayashi, Harumi Morita, Mitsuji Ueda, Michiru Sakamoto, Hiroshi Noguchi

Strength of materials

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

The non-combustible Mg alloy is useful for structural material because of the high specific strength and the high ignition point, but the suitable welding condition was not established for manufacturing floor. In this study, a simple evaluation method for fatigue limit characteristics of welded joint was proposed, using the edge shape of welding bead geometry, the inner defect size and the material characteristics. Moreover, the welding condition ranges to ensure a stable fatigue limit for TIG butt joint of non-combustible Mg alloy were proposed by using this method.

Original language	English
Pages (from-to)	1626-1635
Number of pages	10
Journal	Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
Volume	76
Issue number	772
DOIs	https://doi.org/10.1299/kikaia.76.1626
Publication status	Published - Dec 2010

All Science Journal Classification (ASJC) codes

Materials Science(all)
Mechanics of Materials
Mechanical Engineering

Access to Document

10.1299/kikaia.76.1626

Cite this

Hamada, S., Kawazoe, T. A., Hayashi, K., Morita, H., Ueda, M., Sakamoto, M., & Noguchi, H. (2010). Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy). Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 76(772), 1626-1635. https://doi.org/10.1299/kikaia.76.1626

Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy). / Hamada, Shigeru; Kawazoe, Taka Aki; Hayashi, Komei et al.
In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, Vol. 76, No. 772, 12.2010, p. 1626-1635.

Research output: Contribution to journal › Article › peer-review

Hamada, S, Kawazoe, TA, Hayashi, K, Morita, H, Ueda, M, Sakamoto, M & Noguchi, H 2010, 'Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy)', Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, vol. 76, no. 772, pp. 1626-1635. https://doi.org/10.1299/kikaia.76.1626

Hamada S, Kawazoe TA, Hayashi K, Morita H, Ueda M, Sakamoto M et al. Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy). Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 2010 Dec;76(772):1626-1635. doi: 10.1299/kikaia.76.1626

Hamada, Shigeru ; Kawazoe, Taka Aki ; Hayashi, Komei et al. / Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy). In: Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A. 2010 ; Vol. 76, No. 772. pp. 1626-1635.

@article{b40f5ce7e9b9424783edd934cb7d20a5,

title = "Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy)",

abstract = "The non-combustible Mg alloy is useful for structural material because of the high specific strength and the high ignition point, but the suitable welding condition was not established for manufacturing floor. In this study, a simple evaluation method for fatigue limit characteristics of welded joint was proposed, using the edge shape of welding bead geometry, the inner defect size and the material characteristics. Moreover, the welding condition ranges to ensure a stable fatigue limit for TIG butt joint of non-combustible Mg alloy were proposed by using this method.",

author = "Shigeru Hamada and Kawazoe, {Taka Aki} and Komei Hayashi and Harumi Morita and Mitsuji Ueda and Michiru Sakamoto and Hiroshi Noguchi",

year = "2010",

month = dec,

doi = "10.1299/kikaia.76.1626",

language = "English",

volume = "76",

pages = "1626--1635",

journal = "Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A",

issn = "0387-5008",

publisher = "一般社団法人日本機械学会",

number = "772",

}

TY - JOUR

T1 - Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy)

AU - Hamada, Shigeru

AU - Kawazoe, Taka Aki

AU - Hayashi, Komei

AU - Morita, Harumi

AU - Ueda, Mitsuji

AU - Sakamoto, Michiru

AU - Noguchi, Hiroshi

PY - 2010/12

Y1 - 2010/12

N2 - The non-combustible Mg alloy is useful for structural material because of the high specific strength and the high ignition point, but the suitable welding condition was not established for manufacturing floor. In this study, a simple evaluation method for fatigue limit characteristics of welded joint was proposed, using the edge shape of welding bead geometry, the inner defect size and the material characteristics. Moreover, the welding condition ranges to ensure a stable fatigue limit for TIG butt joint of non-combustible Mg alloy were proposed by using this method.

AB - The non-combustible Mg alloy is useful for structural material because of the high specific strength and the high ignition point, but the suitable welding condition was not established for manufacturing floor. In this study, a simple evaluation method for fatigue limit characteristics of welded joint was proposed, using the edge shape of welding bead geometry, the inner defect size and the material characteristics. Moreover, the welding condition ranges to ensure a stable fatigue limit for TIG butt joint of non-combustible Mg alloy were proposed by using this method.

UR - http://www.scopus.com/inward/record.url?scp=79953232026&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79953232026&partnerID=8YFLogxK

U2 - 10.1299/kikaia.76.1626

DO - 10.1299/kikaia.76.1626

M3 - Article

AN - SCOPUS:79953232026

SN - 0387-5008

VL - 76

SP - 1626

EP - 1635

JO - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

JF - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

IS - 772

ER -

Proposal of simple determination method for welding condition of joint from fatigue limit characteristics (1st report, application to TIG-butt-joint of non-combustible Mg alloy)

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this