Preparation of porous La(Sr)Ti(Fe)O3 perovskite oxide tube by filament-winding method

Akihiro Kawahara, Yousuke Takahashi, Yuji Hirano, Masayoshi Hirano, Tatsumi Ishihara

    Research output: Contribution to journalArticlepeer-review


    Porous ceramic tubes consisting of La0.7Sr0.3Ti 0.7Fe0.3O3 (LSTF) perovskite oxide was investigated in this study by using Filament-Winding (FW) method. When methacrylic acid with molecular weight of 50000 was used for organic binder, LSTF fiber with 0.5 mm in diameter and 15 m in length can be obtained by extrusion method. Although the mechanical strength of the obtained LSTF fiber was lower than that of the polymer fiber used for FW method, the obtained LSTF fiber showed reasonably large strength and expand ratio. As a result, LSTF porous tube can be obtained by FW method and calcination at 1673 K. Comparing with the porous tube prepared by a conventional sintering method, it was found that the obtained LSTF tube showed much larger porosity (ca. 80 %) and large air permeation rate.

    Original languageEnglish
    Pages (from-to)252-255
    Number of pages4
    Issue number4
    Publication statusPublished - Apr 2011

    All Science Journal Classification (ASJC) codes

    • Electrochemistry


    Dive into the research topics of 'Preparation of porous La(Sr)Ti(Fe)O3 perovskite oxide tube by filament-winding method'. Together they form a unique fingerprint.

    Cite this