Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature

Teruaki Nomiyama; Yasuhiro Mori; Masashi Yoshimi; Youichiro Arai; Yuuji Horie; Tomoyuki Miyazaki; Hisao Kuriyaki; Kazuyoshi Hirakawa

Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature

Teruaki Nomiyama
, Yasuhiro Mori
, Masashi Yoshimi
, Youichiro Arai
, Yuuji Horie
, Tomoyuki Miyazaki
, Hisao Kuriyaki
, Kazuyoshi Hirakawa

Electronic Devices

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Abstract

Polythiophene (PTh) films on carbon fibers (CFs) were applied to an electrode of a photo-rechargeable battery (PRB). The PRB is a battery which can convert photonic energy to electrochemical energy and in situ store it. PTh/CFs electrodes were prepared by electrochemical deposition at different temperatures, 0, 25 and 40 °C. The characteristics of photo-rechargeability were measured with the irradiation of xenon lamp. The surface flatness and the electrical resistivity of PTh/CFs were estimated using the experimental results of the electrochemical impedance. It was found that PTh/CFs prepared at 0 °C had high flatness and low resistivity.

Original language	English
Pages (from-to)	304-309
Number of pages	6
Journal	Research Reports on Information Science and Electrical Engineering of Kyushu University
Volume	2
Issue number	2
Publication status	Published - Sept 1997

All Science Journal Classification (ASJC) codes

General Computer Science
Electrical and Electronic Engineering

Cite this

Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature. / Nomiyama, Teruaki; Mori, Yasuhiro; Yoshimi, Masashi et al.
In: Research Reports on Information Science and Electrical Engineering of Kyushu University, Vol. 2, No. 2, 09.1997, p. 304-309.

Research output: Contribution to journal › Article › peer-review

@article{38800539dc22450fade31f5cb431ef8f,

title = "Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature",

abstract = "Polythiophene (PTh) films on carbon fibers (CFs) were applied to an electrode of a photo-rechargeable battery (PRB). The PRB is a battery which can convert photonic energy to electrochemical energy and in situ store it. PTh/CFs electrodes were prepared by electrochemical deposition at different temperatures, 0, 25 and 40 °C. The characteristics of photo-rechargeability were measured with the irradiation of xenon lamp. The surface flatness and the electrical resistivity of PTh/CFs were estimated using the experimental results of the electrochemical impedance. It was found that PTh/CFs prepared at 0 °C had high flatness and low resistivity.",

author = "Teruaki Nomiyama and Yasuhiro Mori and Masashi Yoshimi and Youichiro Arai and Yuuji Horie and Tomoyuki Miyazaki and Hisao Kuriyaki and Kazuyoshi Hirakawa",

year = "1997",

month = sep,

language = "English",

volume = "2",

pages = "304--309",

journal = "Research Reports on Information Science and Electrical Engineering of Kyushu University",

issn = "1342-3819",

publisher = "Kyushu University",

number = "2",

}

TY - JOUR

T1 - Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature

AU - Nomiyama, Teruaki

AU - Mori, Yasuhiro

AU - Yoshimi, Masashi

AU - Arai, Youichiro

AU - Horie, Yuuji

AU - Miyazaki, Tomoyuki

AU - Kuriyaki, Hisao

AU - Hirakawa, Kazuyoshi

PY - 1997/9

Y1 - 1997/9

N2 - Polythiophene (PTh) films on carbon fibers (CFs) were applied to an electrode of a photo-rechargeable battery (PRB). The PRB is a battery which can convert photonic energy to electrochemical energy and in situ store it. PTh/CFs electrodes were prepared by electrochemical deposition at different temperatures, 0, 25 and 40 °C. The characteristics of photo-rechargeability were measured with the irradiation of xenon lamp. The surface flatness and the electrical resistivity of PTh/CFs were estimated using the experimental results of the electrochemical impedance. It was found that PTh/CFs prepared at 0 °C had high flatness and low resistivity.

AB - Polythiophene (PTh) films on carbon fibers (CFs) were applied to an electrode of a photo-rechargeable battery (PRB). The PRB is a battery which can convert photonic energy to electrochemical energy and in situ store it. PTh/CFs electrodes were prepared by electrochemical deposition at different temperatures, 0, 25 and 40 °C. The characteristics of photo-rechargeability were measured with the irradiation of xenon lamp. The surface flatness and the electrical resistivity of PTh/CFs were estimated using the experimental results of the electrochemical impedance. It was found that PTh/CFs prepared at 0 °C had high flatness and low resistivity.

UR - https://www.scopus.com/pages/publications/0031220916

UR - https://www.scopus.com/pages/publications/0031220916#tab=citedBy

M3 - Article

AN - SCOPUS:0031220916

SN - 1342-3819

VL - 2

SP - 304

EP - 309

JO - Research Reports on Information Science and Electrical Engineering of Kyushu University

JF - Research Reports on Information Science and Electrical Engineering of Kyushu University

IS - 2

ER -

Photo-rechargeable battery with an electrode of polythiophene films on carbon fibers - Influence of electrochemical-deposition temperature

Abstract

All Science Journal Classification (ASJC) codes

Other files and links

Fingerprint

Cite this