Performance model for large area solid oxide fuel cells

Dino Klotz, Jan Philipp Schmidt, André Weber, Ellen Ivers-Tiffée

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)


A parameter set obtained from a 1 cm2 size electrode cell is used to develop and calibrate a one-dimensional spatially resolved model. It is demonstrated that this performance model precalculates the evolving operating parameters along the gas channel of a large-sized cell. Input parameters are: (i) number of discretization elements N, accounting for anodic gas conversion, (ii) anodic gas flow rate and composition and (iv) operating voltage. The model calculations based on data from the 1 cm2 cell are scaled to be equivalent to a larger cell with 16 cm2 electrode size which is used to validate the performance model. The current/voltage characteristics can be predicted very accurately, even when anodic gas flow rates vary by as much as a factor of four. The performance model presented herein simulates the total overvoltage and does so in a broad range of operation conditions. This is done with an accuracy of the simulated current better than 6.1% for UOP = 0.85 V, 3.8% for UOP = 0.8 V and 3.7% for UOP = 0.75 V. It is hoped that these equations will form the basis of a greater model, capable of predicting all the conditions found throughout any industrial stack.

Original languageEnglish
Pages (from-to)65-75
Number of pages11
JournalJournal of Power Sources
Publication statusPublished - Aug 1 2014
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Renewable Energy, Sustainability and the Environment
  • Energy Engineering and Power Technology
  • Physical and Theoretical Chemistry
  • Electrical and Electronic Engineering


Dive into the research topics of 'Performance model for large area solid oxide fuel cells'. Together they form a unique fingerprint.

Cite this