Abstract
The hydrogen effect on crack growth behaviour in a type 304 austenitic stainless steel was investigated and the following results were obtained. The crack growth rate in hydrogen gas is accelerated compared with that in air. In order to clarify the mechanism of the acceleration, the growth behaviours of a crack propagating in a grain and propagating along the boundary to be a fracture facet were investigated. Slip behaviour, opening displacement and fractography showed that the slip-off mechanism in fatigue crack growth is valid even in hydrogen gas. Hydrogen mainly affects slip behaviour such that slip bands concentrate at a crack tip and result in acceleration of the growth rate. The facets are not significantly responsible for the acceleration. The ratio of facets to the entire area is low, and a crack nearly compensates for the temporary acceleration by the facets with subsequent deceleration.
| Original language | English |
|---|---|
| Pages (from-to) | 99-113 |
| Number of pages | 15 |
| Journal | International Journal of Fracture |
| Volume | 132 |
| Issue number | 2 |
| DOIs | |
| Publication status | Published - Mar 2005 |
All Science Journal Classification (ASJC) codes
- Computational Mechanics
- Modelling and Simulation
- Mechanics of Materials