Influences of solute concentration on uniform elongation and dislocation characteristics of Al-Mg and Al-Si alloys

Yuki Koshino, Yasuhiro Aruga, Takuya Maeda, Kenji Kaneko

    Research output: Contribution to journalArticlepeer-review

    1 Citation (Scopus)

    Abstract

    Influences of solute atoms and their contents on the uniform elongation were investigated using Al-Mg and Al-Si alloys respectively. Dislocation characteristics of both alloys were examined by X-ray diffractometry and transmission electron microscopy. In the case of solute concentration ranging between 0.3 and 1.6 (mass%), it was found that the increase of solute concentration caused the decrease of the uniform elongation for the case of Al-Mg alloys, whereas the increase of that for the case of Al-Si alloys. It was suggested that the solute Mg in aluminum caused a strong interaction on dislocation with comparison to the solute Si, which probably caused the large increase of dislocation density during the tensile deformation. It is considered that the solute Si has stronger effect of decreasing the stacking fault energy of the aluminum alloy than the solute Mg. Thus, as for Al-Si alloys, the increase of the work-hardenability and the uniform elongation may occur by retardation of the dynamic recovery during the tensile deformation.

    Original languageEnglish
    Pages (from-to)180-185
    Number of pages6
    JournalKeikinzoku/Journal of Japan Institute of Light Metals
    Volume69
    Issue number3
    DOIs
    Publication statusPublished - 2019

    All Science Journal Classification (ASJC) codes

    • Mechanics of Materials
    • Mechanical Engineering
    • Metals and Alloys
    • Materials Chemistry

    Fingerprint

    Dive into the research topics of 'Influences of solute concentration on uniform elongation and dislocation characteristics of Al-Mg and Al-Si alloys'. Together they form a unique fingerprint.

    Cite this