Incremental Feeding High-Pressure Sliding for Grain Refinement of Large-Scale Sheets: Application to Inconel 718

Yoichi Takizawa, Kosei Sumikawa, Kyohei Watanabe, Takahiro Masuda, Manabu Yumoto, Yuta Kanai, Yoshiharu Otagiri, Zenji Horita

    Research output: Contribution to journalArticlepeer-review

    18 Citations (Scopus)


    This study updates a process of high-pressure sliding (HPS) recently developed as a severe plastic deformation process under high pressure for grain refinement of sheet samples. The updated version, which we call the incremental feeding HPS (IF-HPS), consists of sliding for SPD and feeding for upsizing the SPD-processed area so that, without increasing the capacity of processing facility, it is possible to cover a much larger area with an SPD-processed ultrafine-grained structure with a grain size of ~ 120 nm. For the IF-HPS processing, anvils with flat surfaces but without grooves are used in an unconstrained condition, and the feeding distance is set equal to the deformed width. A Ni-based superalloy (Inconel 718) is processed by the IF-HPS under 4 GPa at room temperature, and it is possible to obtain an SPD-processed sheet with dimensions of approximately 100 × 100 × 1 mm3. Strain distribution and evolution were examined by hardness measurement and simulation using a finite element method. Tensile tests were conducted using tensile specimens extracted from the IF-HPS-processed sheet. Advent of high strain rate superplasticity with the total elongation of more than 400 pct was confirmed by pulling the tensile specimens with an initial strain rate of 2.0 × 10−2 s−1 at a temperature as low as 1073 K. The formability of the IF-HPS-processed sheet was confirmed by successful cup forming. It was also confirmed that the restoration after the superplastic deformation was feasible by subjecting to conventional heat treatment used for Inconel 718.

    Original languageEnglish
    Pages (from-to)1830-1840
    Number of pages11
    JournalMetallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
    Issue number5
    Publication statusPublished - May 1 2018

    All Science Journal Classification (ASJC) codes

    • Condensed Matter Physics
    • Mechanics of Materials
    • Metals and Alloys


    Dive into the research topics of 'Incremental Feeding High-Pressure Sliding for Grain Refinement of Large-Scale Sheets: Application to Inconel 718'. Together they form a unique fingerprint.

    Cite this