TY - JOUR
T1 - In situ X-ray diffraction investigation of the evolution of a nanocrystalline lithium-ion sieve from biogenic manganese oxide
AU - Yu, Qianqian
AU - Sasaki, Keiko
N1 - Funding Information:
This work was financially supported by the funding program Next Generation of World-Leading Researchers “Creation of Eco-Materials from Geomimetics” ( GR078 ) from the Japan Society for the Promotion of Science (JSPS). The authors express their appreciation to Mr. Taichi Momoki at Kyushu University for assisting in the sorption experiments.
PY - 2014/12
Y1 - 2014/12
N2 - Microbial catalysis, a primary pathway for the generation of Mn oxides in most natural environments, provides potential to fabricate new materials. A microtube-type lithium manganese oxide (LMO-MT) was synthesized through a solid-state transformation using Mn-oxidizing fungus, Paraconiothyrium sp. WL-2. Compared with abiotic precursors, the lithium-ion sieve microtube (HMO-MT) showed better performance for Li+ recovery. In order to clarify the formation process of LMO-MTs, in situ high-temperature X-ray diffraction was used to compare with three synthetic references. The effects of calcination temperature on crystal phase, composition, particle size and lattice parameters of the LMO-MTs were systematically discussed. It was found that the poorly crystalline structure of biogenic precursor as well as high content of organic matter facilitated the formation of highly crystalline LMO-MTs at low temperature. The unique structural properties of LMO-MTs, including high crystallinity and small lattice constant, are attributed to the high Li+ sorption capacity of HMO-MTs. 2014 Elsevier B.V. All rights reserved.
AB - Microbial catalysis, a primary pathway for the generation of Mn oxides in most natural environments, provides potential to fabricate new materials. A microtube-type lithium manganese oxide (LMO-MT) was synthesized through a solid-state transformation using Mn-oxidizing fungus, Paraconiothyrium sp. WL-2. Compared with abiotic precursors, the lithium-ion sieve microtube (HMO-MT) showed better performance for Li+ recovery. In order to clarify the formation process of LMO-MTs, in situ high-temperature X-ray diffraction was used to compare with three synthetic references. The effects of calcination temperature on crystal phase, composition, particle size and lattice parameters of the LMO-MTs were systematically discussed. It was found that the poorly crystalline structure of biogenic precursor as well as high content of organic matter facilitated the formation of highly crystalline LMO-MTs at low temperature. The unique structural properties of LMO-MTs, including high crystallinity and small lattice constant, are attributed to the high Li+ sorption capacity of HMO-MTs. 2014 Elsevier B.V. All rights reserved.
UR - http://www.scopus.com/inward/record.url?scp=84919766195&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=84919766195&partnerID=8YFLogxK
U2 - 10.1016/j.hydromet.2014.07.002
DO - 10.1016/j.hydromet.2014.07.002
M3 - Article
AN - SCOPUS:84919766195
SN - 0304-386X
VL - 150
SP - 253
EP - 258
JO - Hydrometallurgy
JF - Hydrometallurgy
ER -