Improvement in Switching Characteristics of HTS Power Electric Device Prepared by Pulsed Laser Deposition

Yukihiko Yamagata; Kazufumi Shingai; Tomoaki Ikegami; Kenji Ebihara

doi:10.1109/77.620844

Improvement in Switching Characteristics of HTS Power Electric Device Prepared by Pulsed Laser Deposition

Yukihiko Yamagata, Kazufumi Shingai, Tomoaki Ikegami, Kenji Ebihara

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

Abstract

High quality YBCO film was prepared on the YSZ buffered Hastelloy substrate by PLD method with an effective in-situ anneal. The T_C(zero) and the J_C of the YBCO film on YSZ/Hastelloy is 83.4K and 6.6×10³A/cm² (at 77K), respectively. The phase transition between the superconducting state and the normal conducting slate of the film showed higher response due to the high thermal conductivity and the small thermal capacity than that of the YBCO film deposited on MgO substrate.

Original language	English
Pages (from-to)	1447-1450
Number of pages	4
Journal	IEEE Transactions on Applied Superconductivity
Volume	7
Issue number	2 PART 2
DOIs	https://doi.org/10.1109/77.620844
Publication status	Published - 1997
Externally published	Yes

All Science Journal Classification (ASJC) codes

Electronic, Optical and Magnetic Materials
Condensed Matter Physics
Electrical and Electronic Engineering

Access to Document

10.1109/77.620844

Cite this

@article{d5a09bc2b22745f5b69f44907d19592c,

title = "Improvement in Switching Characteristics of HTS Power Electric Device Prepared by Pulsed Laser Deposition",

abstract = "High quality YBCO film was prepared on the YSZ buffered Hastelloy substrate by PLD method with an effective in-situ anneal. The TC(zero) and the JC of the YBCO film on YSZ/Hastelloy is 83.4K and 6.6×103A/cm2 (at 77K), respectively. The phase transition between the superconducting state and the normal conducting slate of the film showed higher response due to the high thermal conductivity and the small thermal capacity than that of the YBCO film deposited on MgO substrate.",

author = "Yukihiko Yamagata and Kazufumi Shingai and Tomoaki Ikegami and Kenji Ebihara",

year = "1997",

doi = "10.1109/77.620844",

language = "English",

volume = "7",

pages = "1447--1450",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "2 PART 2",

}

TY - JOUR

T1 - Improvement in Switching Characteristics of HTS Power Electric Device Prepared by Pulsed Laser Deposition

AU - Yamagata, Yukihiko

AU - Shingai, Kazufumi

AU - Ikegami, Tomoaki

AU - Ebihara, Kenji

PY - 1997

Y1 - 1997

N2 - High quality YBCO film was prepared on the YSZ buffered Hastelloy substrate by PLD method with an effective in-situ anneal. The TC(zero) and the JC of the YBCO film on YSZ/Hastelloy is 83.4K and 6.6×103A/cm2 (at 77K), respectively. The phase transition between the superconducting state and the normal conducting slate of the film showed higher response due to the high thermal conductivity and the small thermal capacity than that of the YBCO film deposited on MgO substrate.

AB - High quality YBCO film was prepared on the YSZ buffered Hastelloy substrate by PLD method with an effective in-situ anneal. The TC(zero) and the JC of the YBCO film on YSZ/Hastelloy is 83.4K and 6.6×103A/cm2 (at 77K), respectively. The phase transition between the superconducting state and the normal conducting slate of the film showed higher response due to the high thermal conductivity and the small thermal capacity than that of the YBCO film deposited on MgO substrate.

UR - http://www.scopus.com/inward/record.url?scp=0031166785&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0031166785&partnerID=8YFLogxK

U2 - 10.1109/77.620844

DO - 10.1109/77.620844

M3 - Article

AN - SCOPUS:0031166785

SN - 1051-8223

VL - 7

SP - 1447

EP - 1450

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 2 PART 2

ER -

Improvement in Switching Characteristics of HTS Power Electric Device Prepared by Pulsed Laser Deposition

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this