Impedance matching antenna-integrated high-efficiency energy harvesting circuit

Yuharu Shinki; Kyohei Shibata; Mohamed Mansour; Haruichi Kanaya

doi:10.3390/s17081763

Impedance matching antenna-integrated high-efficiency energy harvesting circuit

Yuharu Shinki, Kyohei Shibata, Mohamed Mansour, Haruichi Kanaya

Integrated Electronic Systems

Research output: Contribution to journal › Article › peer-review

22 Citations (Scopus)

Abstract

This paper describes the design of a high-efficiency energy harvesting circuit with an integrated antenna. The circuit is composed of series resonance and boost rectifier circuits for converting radio frequency power into boosted direct current (DC) voltage. The measured output DC voltage is 5.67 V for an input of 100 mV at 900 MHz. Antenna input impedance matching is optimized for greater efficiency and miniaturization. The measured efficiency of this antenna-integrated energy harvester is 60% for -4.85 dBm input power and a load resistance equal to 20 kΩ at 905 MHz.

Original language	English
Article number	1763
Journal	Sensors (Switzerland)
Volume	17
Issue number	8
DOIs	https://doi.org/10.3390/s17081763
Publication status	Published - Aug 2017

All Science Journal Classification (ASJC) codes

Analytical Chemistry
Biochemistry
Atomic and Molecular Physics, and Optics
Instrumentation
Electrical and Electronic Engineering

Access to Document

10.3390/s17081763

Cite this

@article{35a51c59c62e496294617f7a8c1bce69,

title = "Impedance matching antenna-integrated high-efficiency energy harvesting circuit",

abstract = "This paper describes the design of a high-efficiency energy harvesting circuit with an integrated antenna. The circuit is composed of series resonance and boost rectifier circuits for converting radio frequency power into boosted direct current (DC) voltage. The measured output DC voltage is 5.67 V for an input of 100 mV at 900 MHz. Antenna input impedance matching is optimized for greater efficiency and miniaturization. The measured efficiency of this antenna-integrated energy harvester is 60% for -4.85 dBm input power and a load resistance equal to 20 kΩ at 905 MHz.",

author = "Yuharu Shinki and Kyohei Shibata and Mohamed Mansour and Haruichi Kanaya",

note = "Funding Information: This work was partly supported by the VLSI Design and Education Center (VTEC), the University of Tokyo in collaboration with CADENCE Corporation, and Keysight Technologies. This work was partly supported by a JSPS Grant-in-Aid for Collaborative Research Programs Based on Industrial Demand, KAKENHI, CREST (JPMJCR1431), and the Matching Planner Program, JST Japan. Publisher Copyright: {\textcopyright} 2017 by the authors. Licensee MDPI, Basel, Switzerland.",

year = "2017",

month = aug,

doi = "10.3390/s17081763",

language = "English",

volume = "17",

journal = "Sensors (Switzerland)",

issn = "1424-8220",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "8",

}

TY - JOUR

T1 - Impedance matching antenna-integrated high-efficiency energy harvesting circuit

AU - Shinki, Yuharu

AU - Shibata, Kyohei

AU - Mansour, Mohamed

AU - Kanaya, Haruichi

N1 - Funding Information: This work was partly supported by the VLSI Design and Education Center (VTEC), the University of Tokyo in collaboration with CADENCE Corporation, and Keysight Technologies. This work was partly supported by a JSPS Grant-in-Aid for Collaborative Research Programs Based on Industrial Demand, KAKENHI, CREST (JPMJCR1431), and the Matching Planner Program, JST Japan. Publisher Copyright: © 2017 by the authors. Licensee MDPI, Basel, Switzerland.

PY - 2017/8

Y1 - 2017/8

N2 - This paper describes the design of a high-efficiency energy harvesting circuit with an integrated antenna. The circuit is composed of series resonance and boost rectifier circuits for converting radio frequency power into boosted direct current (DC) voltage. The measured output DC voltage is 5.67 V for an input of 100 mV at 900 MHz. Antenna input impedance matching is optimized for greater efficiency and miniaturization. The measured efficiency of this antenna-integrated energy harvester is 60% for -4.85 dBm input power and a load resistance equal to 20 kΩ at 905 MHz.

AB - This paper describes the design of a high-efficiency energy harvesting circuit with an integrated antenna. The circuit is composed of series resonance and boost rectifier circuits for converting radio frequency power into boosted direct current (DC) voltage. The measured output DC voltage is 5.67 V for an input of 100 mV at 900 MHz. Antenna input impedance matching is optimized for greater efficiency and miniaturization. The measured efficiency of this antenna-integrated energy harvester is 60% for -4.85 dBm input power and a load resistance equal to 20 kΩ at 905 MHz.

UR - http://www.scopus.com/inward/record.url?scp=85026840664&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85026840664&partnerID=8YFLogxK

U2 - 10.3390/s17081763

DO - 10.3390/s17081763

M3 - Article

C2 - 28763043

AN - SCOPUS:85026840664

SN - 1424-8220

VL - 17

JO - Sensors (Switzerland)

JF - Sensors (Switzerland)

IS - 8

M1 - 1763

ER -

Impedance matching antenna-integrated high-efficiency energy harvesting circuit

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this