Flux-flow-type Josephson oscillator for millimeter and submillimeter wave region. III. Oscillation stability

T. Nagatsuma, K. Enpuku, K. Sueoka, K. Yoshida, F. Irie

Research output: Contribution to journalArticlepeer-review

90 Citations (Scopus)


Numerical as well as experimental studies have been made of the oscillation stability for the travelling-wave-type oscillator, which utilizes a vortex motion in a long Josephson junction, i.e., a flux flow. For the Josephson oscillator, a steep current step in a dc I-V characteristic improves the oscillation stability. Two kinds of effects which degrade the steepness of the current step have been investigated for the long junction of the overlap geometry. One is the self-field effect which makes the current step inclined, and the other is the resonant motion of the vortices which induces a staircaselike structure on the current step. We have discussed the method for the reduction of these effects and proposed a novel junction geometry without these effects, i.e., an overlap junction with a projection on one junction side. With the new geometry, we have obtained current steps whose slope is about one hundred times steeper than those obtained with the conventional overlap geometry and whose height attains about a half of the maximum critical current over the wide voltage region 0.1≤Vdc≤1.0 mV. The linewidth calculated from the current step is expected to be a few kHz.

Original languageEnglish
Pages (from-to)441-449
Number of pages9
JournalJournal of Applied Physics
Issue number1
Publication statusPublished - 1985

All Science Journal Classification (ASJC) codes

  • General Physics and Astronomy


Dive into the research topics of 'Flux-flow-type Josephson oscillator for millimeter and submillimeter wave region. III. Oscillation stability'. Together they form a unique fingerprint.

Cite this