fault diagnosis method using a signed digraph for multiple origins of failures evaluation of the diagnosis accuracy

Shigeyuki Tateno; Hisayoshi Matsuyama; Yoshifumi Tsuge

doi:10.1109/CACSD-CCA-ISIC.2006.4777162

fault diagnosis method using a signed digraph for multiple origins of failures evaluation of the diagnosis accuracy

Shigeyuki Tateno, Hisayoshi Matsuyama, Yoshifumi Tsuge

Product system engineering

Research output: Contribution to conference › Paper › peer-review

Abstract

A fault diagnosis algorithm using a signed digraph as a model of a system is useful to real-time diagnosis of failures that occur in a chemical plant. It has been improved so much that it can find multiple origins of failures that occur in the plant at the same time. It is imperative that the diagnosis system be evaluated in the design phase of the system in advance for its practical use. In this paper, an accuracy of diagnostic results using the algorithm for multiple origins has been examined by its application to data obtained by the simulation of tank pipeline systems. The accuracy of diagnosis has been evaluated properly by the size of the greatest set of candidates.

Original language	English
Pages	3271-3276
Number of pages	6
DOIs	https://doi.org/10.1109/CACSD-CCA-ISIC.2006.4777162
Publication status	Published - 2006
Event	2006 IEEE International Conference on Control Applications, CCA 2006 - Munich, Germany Duration: Oct 4 2006 → Oct 6 2006

Other

Other	2006 IEEE International Conference on Control Applications, CCA 2006
Country/Territory	Germany
City	Munich
Period	10/4/06 → 10/6/06

All Science Journal Classification (ASJC) codes

Control and Systems Engineering
Computer Science Applications
Mathematics(all)

Access to Document

10.1109/CACSD-CCA-ISIC.2006.4777162

Cite this

@conference{c4da5645689c4f3fb347ffba6454a36c,

title = "fault diagnosis method using a signed digraph for multiple origins of failures evaluation of the diagnosis accuracy",

abstract = "A fault diagnosis algorithm using a signed digraph as a model of a system is useful to real-time diagnosis of failures that occur in a chemical plant. It has been improved so much that it can find multiple origins of failures that occur in the plant at the same time. It is imperative that the diagnosis system be evaluated in the design phase of the system in advance for its practical use. In this paper, an accuracy of diagnostic results using the algorithm for multiple origins has been examined by its application to data obtained by the simulation of tank pipeline systems. The accuracy of diagnosis has been evaluated properly by the size of the greatest set of candidates.",

author = "Shigeyuki Tateno and Hisayoshi Matsuyama and Yoshifumi Tsuge",

year = "2006",

doi = "10.1109/CACSD-CCA-ISIC.2006.4777162",

language = "English",

pages = "3271--3276",

note = "2006 IEEE International Conference on Control Applications, CCA 2006 ; Conference date: 04-10-2006 Through 06-10-2006",

}

TY - CONF

T1 - fault diagnosis method using a signed digraph for multiple origins of failures evaluation of the diagnosis accuracy

AU - Tateno, Shigeyuki

AU - Matsuyama, Hisayoshi

AU - Tsuge, Yoshifumi

PY - 2006

Y1 - 2006

N2 - A fault diagnosis algorithm using a signed digraph as a model of a system is useful to real-time diagnosis of failures that occur in a chemical plant. It has been improved so much that it can find multiple origins of failures that occur in the plant at the same time. It is imperative that the diagnosis system be evaluated in the design phase of the system in advance for its practical use. In this paper, an accuracy of diagnostic results using the algorithm for multiple origins has been examined by its application to data obtained by the simulation of tank pipeline systems. The accuracy of diagnosis has been evaluated properly by the size of the greatest set of candidates.

AB - A fault diagnosis algorithm using a signed digraph as a model of a system is useful to real-time diagnosis of failures that occur in a chemical plant. It has been improved so much that it can find multiple origins of failures that occur in the plant at the same time. It is imperative that the diagnosis system be evaluated in the design phase of the system in advance for its practical use. In this paper, an accuracy of diagnostic results using the algorithm for multiple origins has been examined by its application to data obtained by the simulation of tank pipeline systems. The accuracy of diagnosis has been evaluated properly by the size of the greatest set of candidates.

UR - http://www.scopus.com/inward/record.url?scp=77952889512&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77952889512&partnerID=8YFLogxK

U2 - 10.1109/CACSD-CCA-ISIC.2006.4777162

DO - 10.1109/CACSD-CCA-ISIC.2006.4777162

M3 - Paper

AN - SCOPUS:77952889512

SP - 3271

EP - 3276

T2 - 2006 IEEE International Conference on Control Applications, CCA 2006

Y2 - 4 October 2006 through 6 October 2006

ER -

fault diagnosis method using a signed digraph for multiple origins of failures evaluation of the diagnosis accuracy

Abstract

Other

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this