TY - JOUR
T1 - Experimental investigation and thermodynamic modeling of adsorption equilibria of MSC30 with R32 for supercritical adsorption cooling systems
AU - Yang, Zhaosheng
AU - Sultan, Muhammad
AU - Thu, Kyaw
AU - Miyazaki, Takahiko
N1 - Publisher Copyright:
© 2023
PY - 2024/2
Y1 - 2024/2
N2 - In the present study, the adsorption isotherms of difluoromethane (R32) on the activated carbon (MSC 30) throughout a temperature range of 25 °C to 150 °C and pressures up to 3000 kPa are measured for possible application in adsorption cooling systems. The Dubinin-Astakhov model was used to fit the experimental data. A thermodynamic model is proposed in this study to investigate the adsorption potential under supercritical conditions. The model is validated using the isotherm data from the experiments and literatures for different working pairs. The validation results exhibited a good agreement between the proposed model and the experimental data, signifying the precision and dependability of the model. The corresponding adsorption isosteric heat model was derived and verified, taking into account both the inclusion and exclusion of the adsorbed volume correction. Furthermore, the developed models were utilized in the equilibrium analysis of an adsorption heat pump to evaluate the performance of the system in terms of the theoretical coefficient of performance (COP) and specific cooling energy (SCE). The analysis covered the driving heat source temperature ranging from 30 °C to 150 °C, with different evaporation temperatures and adsorption temperatures. The results showed that the maximum COP value of 0.47 for the adsorption heat pump system employing the MSC30+R32 pair was achieved at a desorption temperature of 115 °C, at which the SCE was 315.5 kJ·kg−1. The results can potentially improve the accuracy of predicting adsorption behavior and contribute to the development of more efficient and effective adsorption systems.
AB - In the present study, the adsorption isotherms of difluoromethane (R32) on the activated carbon (MSC 30) throughout a temperature range of 25 °C to 150 °C and pressures up to 3000 kPa are measured for possible application in adsorption cooling systems. The Dubinin-Astakhov model was used to fit the experimental data. A thermodynamic model is proposed in this study to investigate the adsorption potential under supercritical conditions. The model is validated using the isotherm data from the experiments and literatures for different working pairs. The validation results exhibited a good agreement between the proposed model and the experimental data, signifying the precision and dependability of the model. The corresponding adsorption isosteric heat model was derived and verified, taking into account both the inclusion and exclusion of the adsorbed volume correction. Furthermore, the developed models were utilized in the equilibrium analysis of an adsorption heat pump to evaluate the performance of the system in terms of the theoretical coefficient of performance (COP) and specific cooling energy (SCE). The analysis covered the driving heat source temperature ranging from 30 °C to 150 °C, with different evaporation temperatures and adsorption temperatures. The results showed that the maximum COP value of 0.47 for the adsorption heat pump system employing the MSC30+R32 pair was achieved at a desorption temperature of 115 °C, at which the SCE was 315.5 kJ·kg−1. The results can potentially improve the accuracy of predicting adsorption behavior and contribute to the development of more efficient and effective adsorption systems.
UR - http://www.scopus.com/inward/record.url?scp=85175019263&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85175019263&partnerID=8YFLogxK
U2 - 10.1016/j.ijheatmasstransfer.2023.124873
DO - 10.1016/j.ijheatmasstransfer.2023.124873
M3 - Article
AN - SCOPUS:85175019263
SN - 0017-9310
VL - 219
JO - International Journal of Heat and Mass Transfer
JF - International Journal of Heat and Mass Transfer
M1 - 124873
ER -