Enhancement of initial permeability due to Mn substitution in polycrystalline Ni0.50-xMnxZn0.50Fe2O4

A. K.M. Akther Hossain, T. S. Biswas, S. T. Mahmud, Takeshi Yanagida, Hidekazu Tanaka, Tomoji Kawai

Research output: Contribution to journalArticlepeer-review

20 Citations (Scopus)


The structural and magnetic properties of Mn substituted Ni0.50-xMnxZn0.50Fe2O4 (where x=0.00, 0.10 and 0.20) sintered at various temperatures have been investigated thoroughly. The lattice parameter, average grain size and initial permeability increase with Mn substitution. Both bulk density and initial permeability increase with increasing sintering temperature from 1250 to 1300 °C and above 1300 °C they decrease. The Ni0.30Mn0.20Zn0.50Fe2O4 sintered at 1300 °C shows the highest relative quality factor and highest initial permeability among the studied samples. The initial permeability strongly depends on average grain size and intragranular porosity. From the magnetization as a function of applied magnetic field, M(H), it is clear that at room temperature all samples are in ferrimagnetic state. The number of Bohr magneton, n(μB), and Neel temperature, TN, decrease with increasing Mn substitution. It is found that Mn substitution in Ni0.50-xMnxZn0.50Fe2O4 (where x=0.20) decreases the Neel temperature by 25% but increases the initial permeability by 76%. Possible explanation for the observed characteristics of microstructure, initial permeability, DC magnetization and Neel temperature of the studied samples are discussed.

Original languageEnglish
Pages (from-to)81-87
Number of pages7
JournalJournal of Magnetism and Magnetic Materials
Issue number2
Publication statusPublished - Jan 2009
Externally publishedYes

All Science Journal Classification (ASJC) codes

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics


Dive into the research topics of 'Enhancement of initial permeability due to Mn substitution in polycrystalline Ni0.50-xMnxZn0.50Fe2O4'. Together they form a unique fingerprint.

Cite this