Electrodeposition behavior and properties of iron-group metal alloys with W from ammoniacal citrate baths

Akira Kubota; Yasunori Tashiro; Kazuhiko Yamasaki; Hiroaki Nakano; Satoshi Oue; Shigeo Kobayashi; Tetsuya Akiyama; Hisaaki Fukushima

doi:10.2355/tetsutohagane1955.86.2_116

Electrodeposition behavior and properties of iron-group metal alloys with W from ammoniacal citrate baths

Akira Kubota, Yasunori Tashiro, Kazuhiko Yamasaki, Hiroaki Nakano, Satoshi Oue, Shigeo Kobayashi, Tetsuya Akiyama, Hisaaki Fukushima

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Abstract

The electrodeposition behavior of iron-group metal alloys with W was studied in ammoniacal citrate baths of various compositions at 50 °C under galvanostatic conditions. The wear and corrosion resistances of iron-group metal alloys with W were also investigated by sliding wear test of ring-on-plate type at 300 °C and dipping test in HNO₃, H₂SO₄ and HF solutions. The relationship between the alloy composition and the cathode current efficiency showed the existence of two characteristic alloy compositions, the one appeared at a maximum partial current efficiency of W and the other corresponded to the limiting W content.

Original language	English
Pages (from-to)	116-122
Number of pages	7
Journal	Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
Volume	86
Issue number	2
DOIs	https://doi.org/10.2355/tetsutohagane1955.86.2_116
Publication status	Published - 2000

All Science Journal Classification (ASJC) codes

Condensed Matter Physics
Physical and Theoretical Chemistry
Metals and Alloys
Materials Chemistry

Access to Document

10.2355/tetsutohagane1955.86.2_116

Cite this

@article{2c2c302d436c446e84e618a6c984517f,

title = "Electrodeposition behavior and properties of iron-group metal alloys with W from ammoniacal citrate baths",

abstract = "The electrodeposition behavior of iron-group metal alloys with W was studied in ammoniacal citrate baths of various compositions at 50 °C under galvanostatic conditions. The wear and corrosion resistances of iron-group metal alloys with W were also investigated by sliding wear test of ring-on-plate type at 300 °C and dipping test in HNO3, H2SO4 and HF solutions. The relationship between the alloy composition and the cathode current efficiency showed the existence of two characteristic alloy compositions, the one appeared at a maximum partial current efficiency of W and the other corresponded to the limiting W content.",

author = "Akira Kubota and Yasunori Tashiro and Kazuhiko Yamasaki and Hiroaki Nakano and Satoshi Oue and Shigeo Kobayashi and Tetsuya Akiyama and Hisaaki Fukushima",

year = "2000",

doi = "10.2355/tetsutohagane1955.86.2_116",

language = "English",

volume = "86",

pages = "116--122",

journal = "Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan",

issn = "0021-1575",

publisher = "一般社団法人日本鉄鋼協会",

number = "2",

}

TY - JOUR

T1 - Electrodeposition behavior and properties of iron-group metal alloys with W from ammoniacal citrate baths

AU - Kubota, Akira

AU - Tashiro, Yasunori

AU - Yamasaki, Kazuhiko

AU - Nakano, Hiroaki

AU - Oue, Satoshi

AU - Kobayashi, Shigeo

AU - Akiyama, Tetsuya

AU - Fukushima, Hisaaki

PY - 2000

Y1 - 2000

N2 - The electrodeposition behavior of iron-group metal alloys with W was studied in ammoniacal citrate baths of various compositions at 50 °C under galvanostatic conditions. The wear and corrosion resistances of iron-group metal alloys with W were also investigated by sliding wear test of ring-on-plate type at 300 °C and dipping test in HNO3, H2SO4 and HF solutions. The relationship between the alloy composition and the cathode current efficiency showed the existence of two characteristic alloy compositions, the one appeared at a maximum partial current efficiency of W and the other corresponded to the limiting W content.

AB - The electrodeposition behavior of iron-group metal alloys with W was studied in ammoniacal citrate baths of various compositions at 50 °C under galvanostatic conditions. The wear and corrosion resistances of iron-group metal alloys with W were also investigated by sliding wear test of ring-on-plate type at 300 °C and dipping test in HNO3, H2SO4 and HF solutions. The relationship between the alloy composition and the cathode current efficiency showed the existence of two characteristic alloy compositions, the one appeared at a maximum partial current efficiency of W and the other corresponded to the limiting W content.

UR - http://www.scopus.com/inward/record.url?scp=0034135599&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0034135599&partnerID=8YFLogxK

U2 - 10.2355/tetsutohagane1955.86.2_116

DO - 10.2355/tetsutohagane1955.86.2_116

M3 - Article

AN - SCOPUS:0034135599

SN - 0021-1575

VL - 86

SP - 116

EP - 122

JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan

IS - 2

ER -

Electrodeposition behavior and properties of iron-group metal alloys with W from ammoniacal citrate baths

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this