Effect of sodium sulfite on floatability of chalcopyrite and molybdenite

Hajime Miki, Tsuyoshi Hirajima, Yukihiro Muta, Gde Pandhe Wisnu Suyantara, Keiko Sasaki

Research output: Contribution to journalArticlepeer-review

23 Citations (Scopus)


Sodium hydrogen sulfide (NaHS) is commonly used as a copper depressant in the selective flotation of copper and molybdenum ores. However, the process is facing health and safety issues because NaHS readily yields toxic hydrogen sulfide gas (H2S) under acidic conditions. In this study, Na2SO3 was proposed as an alternative copper depressant. The effect of Na2SO3 on the surface wettability and floatability of chalcopyrite and molybdenite—typical copper and molybdenum minerals, respectively—was intensively studied using contact angle measurements and flotation tests. Contact angle readings show that the chalcopyrite surface became hydrophilic after the Na2SO3 treatment. Meanwhile, the molybdenite surface was relatively more hydrophobic compared with that of chalcopyrite after the treatment. Flotation tests using pure minerals of chalcopyrite and molybdenite demonstrate that the floatability of chalcopyrite decreased with increasing concentration of Na2SO3. On the other hand, the floatability of molybdenite gradually increased under similar conditions, suggesting that Na2SO3 might have the potential to be used for selective flotation of chalcopyrite and molybdenite. A possible mechanism is proposed in this study to explain the phenomenon using X-ray photoelectron spectroscopy analysis.

Original languageEnglish
Article number172
Issue number4
Publication statusPublished - Apr 2018

All Science Journal Classification (ASJC) codes

  • Geotechnical Engineering and Engineering Geology
  • Geology


Dive into the research topics of 'Effect of sodium sulfite on floatability of chalcopyrite and molybdenite'. Together they form a unique fingerprint.

Cite this